Product name:Automatic Control Water-resisting Incubator Thermostat
Incubator Thermostat specification
Model | GHP-9050 | GHP-9080 | GHP-9160 | GHP-9270 |
Heating method | Water jacket | |||
voltage | 220V 50HZ | |||
Input power | 450W | 650W | 850W | 1350W |
Temperature range | RT+5~65°C operation temperature:5~35°C | |||
Temperature resolution | 0.1°C | |||
Constant temperature volatility | ±0.5°C | |||
Inner size(mm) | 350×350×410 | 400×400×500 | 500×500×650 | 600×600×750 |
Outer size(mm) | 545×465×710 | 595×525×800 | 695×615×950 | 795×715×1030 |
Shelves(standard) | 2 pieces | |||
Timing range | 1~9999min | |||
Incubator Thermostat optional accessories
*Intellective procedure temperature controller
*Intellective liquid crystal procedure temperture controller
*Independent limiting temperature controller
*Printer
*RS485 port and communication
*25mm/50mm/100mm cable port
Incubator Thermostat character
1.With timing function and microcomputer controller, if the temperature in the cabinet higher the set value or the level of water jacket water is too high and too low,automatically give out light alarm, low water level stops heating at the same time.
2.Water jacket heating mode, double door structure, motor control switch.when the Inner glass door opens, breeze circulation and automatically stop heating,without overshoot.
3.Stainless steel workshop. Water jacket type heating method, temperature uniformity, and still can keep constant temperature for a long time when the power is cut off.
4.Equipped with individual limit temperature alarm system, exceed limit temperature automatically interrupted, guarantee the safe operation of the experiment, no accident.