product introduction
the wet materials are transferred and throw down repeatedly by the cylinder. when they are falling, they are crushed into particles by the dispersioning device. the wet material get fully contacting with hot air flow.
it is used for sawdust, chinese herbal medicine, grains, cassava, slag, melon seeds, bagasse, vegetable, etc.
the equipment is mainly composed of solid of rotation, lifting blade, transmission, support device, seal ring. dryer is a slightly inclined to the horizontal cylinder, material from the higher end of the added material and high temperature flue gas and flow into the cylinder, with the rotation of the cylinder, the material by gravity to the lower end of the run. contact surface mounted on the cylinder wall copy board, the material took another shed, so that the material and increase airflow to improve the drying rate and to promote material line before. the dried product collected from the bottom.
features of dryer
the dryer has large capacity, less fuel consumption, low costs, cylinder running smoothly, strong anti-overload, high reliability features. it also has a high temperature characteriatic, hot air can be used for rapid drying of the material.
pictures of dryer
available materials of dryer
1. The chemical industry, miners, metallurgy and other industries, such as ore, slag, coal, metal powder, clay, kaolin.
2. agriculture, feed, fertilizer industry, such as straw, grass, leaves, fish meal, corn sauce, starch residue, lees, dregs, Marc, soy, bagasse, peat, organic fertilizer, sludge, fish waste food factory waste, slaughterhouse waste, organic fertilizer, inorganic fertilizer, ammonium sulfate fertilizer.
3. There are special requirements of powder, dry granular materials. Such as various crystals, precipitated calcium carbonate, activated clay, magnetic powder, graphite, mineral mud, clay, lime slurry, ore slurry, phosphorus slag, red mud from aluminum.
4. Requests the low-temperature drying, and the need for high-volume continuous dry material.
Installation and maintenance
Folding edit this section
Machine maintenance is an extremely important regular work, it should work closely with most of the operations and maintenance, etc., should be full-time personnel on duty checks.
Installation test: Folding
1, the device should be installed on a level concrete foundation with anchor bolts.
2, the installation should pay attention to the main body vertical and horizontal.
3. After installation check all parts for loose bolts and host the doors are tight and, if requested to tighten.
4, according to the configuration of power equipment and power line control switch.
5, the inspection is completed, empty load test, test the normal production.
costomers from all over the world
2. We can design the machine and provide drawing paper depends on your facts
3. Engineer available to install machinery overseas
4. We will pick you up at airport or railway station when you come to visit our factory
Company uphold: honesty, quality first, customer first for the purpose.
Gongyi Dongxing Machinery company is specialized in the import, export and wholesale biomass charcoal machinery production line, like: wood crusher, sawdust dryer, briquette machine, and carbonization stove,etc. The final briquette or charcoal are best fuel for barbecue or boiler. We have the belief that chance favors the minds who are prepared, so in our company, every worker keeps studying.
Our aim is to supply the market with top quality charcoal equipment, and provide best service and best price for our customer.
Welcome to visit us or free consultancy, networking, and knowledge sharing.
Your trust will give us great help.
Before buying ,can you tell me:
1.What's your raw material and the moisture of the materials ?
2.What's the final moisture after drying you need ?
3.What's the production capacity you want? How many tons or cubic meters per hour?