Ore Pellet Drying Machine
1.Company Introduction
Zhengzhou Weilite Machinery Equipment Co.,Ltd. is a professional mining machine manufacturer, we also offers other machines such as crusher, ball mill, rotary dryer,belt dryer,briquette machine,mixer, etc. Website: www.ur-brand.net www.ur-brand.net www.ur-brand.nethttp://www.wlt-machine.cn/
2. Ore Pellet Drying Machine Introduction
The Ore Pellet Drying Machine is mainly suppressed by the finished ball transfer conveyor directly to the output unit on the plate, by the upper end of the scraper conveyor plate will evenly distributed on the finished ball dryer to improve the permeability of the ball, to the drying effect.
Drying time is usually 20-30 minutes, the furnace is made of high-temperature drying of the heat-resisting steel and high temperature chain conveyor consisting of a tunnel kiln. After high temperature resistant metal mesh conveyor belt, belt into a ball in the net after 25-30 minutes of drying belt by cooling output.
3.Application Of Ore Pellet Drying Machine
Ore Pellet Drying Machine is a common continuous drying equipment can be widely used in the chemical, food, medicine, building materials, electronics and other industries, especially for better drying breathable sheet, strip, granular materials, for the filter cake material paste and the like, can also be pelletized or extruded pieces after the molding mechanism dried.
4. Ore Pellet Drying Machine Advantage
1. Ore Pellet Drying Machine can adjust the amount of air, heating temperature, residence time, and feed rate in order to achieve the best drying results.
2.Flexible network device configuration can be used with dryer mesh belt washing system and material cooling system.
3. Ore Pellet Drying Machine (mesh belt dryer) Most air recycling, highly energy saving.
4.Unique sub-air dryer unit, hot air distribution is more uniform, to ensure product quality and consistency.
5.Heat source can be steam, oil, or gas stove matching points.
5.Feacture Of Ore Pellet Drying Machine
1,A small investment, quick drying speed, high evaporating intensity.
2,High efficiency, high yield, good quality of product,
3,Can regulate air quantity, heating temperature, residence time of materials on the dryer
4,The heat source may be steam, heat conduction oil, or gas hot air furnace.
6.Ore Pellet Drying Machine Working Principle
Material by feeder evenly the shop on the net, net belt use 12 to 60 of the stainless steel wire mesh. There is movement transmission device drag in the dryer. Mesh belt dryer is each unit hot air circulation, independent part of the tail gas has special platoon is wet exhaust fan, exhaust valve control, the heat down to up or down through the shop on the net belt material, dry heat and moisture away. Mesh belt to move slowly, running speed can adjust freely according to the material temperature, drying after finished product continuous fell into the receiving device.
7. Ore Pellet Drying Machine Structure
Ore Pellet Drying Machine organic head, drying section,tail, belt, gear, into the duct, the duct, fan (hot air source another set) and other components.
Organic materials into the slowly drying head by drying, belt line speed depending on the type and moisture content of the material may be. Merry to negative pressure, porous intake to ensure effective drying area, Merry wind speed distribution, improve the drying effect. To get the best drying results and appropriate yield, moisture content of materials, wire mesh belt speed, temperature and wind with the wind must be appropriate and reasonable, organic combination.
8. Mainly market
The dryer machine is widely used in India, Singapore, Indonesia,Pakistan, Malaysia, the Philippines etc.
9.Ore Pellet Drying Machine Technical Parameter
Model | 202 | 204 | 304 | 306 |
Length | 20m | 20m | 30m | 30m |
Deck layer | 2 | 4 | 4 | 6 |
Available Width | 1.2m | 1.2m | 1.5m | 1.5m |
Ave. thickness of material | 200mm | 200mm | 200mm | 200mm |
Quality to be dryed | 6t/h | 10t/h | 15t/h | 20t/h |
Water content before drying | 8~12% | 8~12% | 8~12% | 8~12% |
Trans Mission Powder | 3kw | 3x2 kw | 5.5x2 kw | 5.5x3 kw |
Temperature of input air | 180~250°c | 180~250°c | 180~250°c | 180~250°c |
Moisture in hot input air | ≤0.01kg/kg dry air | ≤0.01kg/kg dry air | ≤0.01kg/kg dry air | ≤0.01kg/kg dry air |
10.Our Services
1) Pre-sale Service:
Suitable-design products and reasonable price will be supplied to you to meet your need. We can also offer experiment to test the equipment that the customer need.
2) After-sale Service:
On the spot guidance for installation by our engineers, and the buyer is responsible for the expense. We have a perfect after-sales service system and team with professional.
11.Packing And Shipping