20-25T/H dry mortar / Automatic dry mortar production line low invest cost
Introduction:
1, Good dispersion: The equipment completely solved this problem that the proportion of different materials due to segregation and fiber and other issues of secondary reunion
2, Use range: this equipment can satisfy different performance requirements of the dry mortar production. Such as: bonding mortar, plastering mortar, heat preservation system required polymer mortar, polystyrene particle insulation mortar, etc.
3, Small investment: this equipment has obvious advantages, the price of small investment, quick effect.
4, Simple to use : the equipment has cover an area small, simple operation, low energy consumption, can produce 3-8 tons per hour
5, long service life: all damageable parts of this equipment use high strength steel (wear-resisting of high manganese steel) for the component, make it has long service life.
Small Production Lines we do:
Production line mode | Output | Occupied area | Equipment height | Remark of batching and packing |
Simple | 1-15t/h | 40m2 | 5-10m | Manual batching and packing |
Basic | 5-15t/h | 40-60m2 | 6-10m | Manual batching, automatic packing |
Semiautomatic of serial mode | 5-15t/h | 40-80m2 | 8-12m | Automatic batching of coarse material, manual batching of additive, automatic packing |
Semiautomatic of tower mode | 5-50t/h | 40-100m2 | 10-25m | the same to serial semiautomatic mode |
Fully automatic of tower mode | 5-50t/h | 60-500m2 | 10-25m | Automatic batching of all raw material and packing |
1.Main configuration for 20-25T/H dry mortar
- 1.Raw material Storage Silos
- 2.Sand Drying Unit
- 3.Bucket Elevator
- 4.Sprial Conveyor
- 5.Weighing System
- 6.Mixer
- 7.End Product hopper
- 8.Bagging System
- 9.De-dusting System
- 10.Computer control system
- 11.Air Compressor
- 12.Air-phase Balance System
- 13.Steel Structure
- 14.End Products Storage Silos
2. Features for 20-25T/H dry mortar
1. Stable performance, particularly strong wear resistance, long service life, the material is mixed evenly;
2. Moderate investment, short construction period, investment returns quickly.
3.Advantage for 20-25T/H dry mortar
1. In contrast to work-site mortars ,dry mortar is also called pre-mixed mortar ,which is produced in the factory with dedicated facilities on batching and blending of ingredients in highly-controlled process .It can be used directly just by adding water in work site .
2. It has advantages of consistent quality ,controlled inventory ,saving time and labor cost .By adding different chemical additives ,it has fine properties of bond ,thermal and acoustic insulation,crack-resistance ,workability , Water-retention,wear-proof,anti-corrosion,etc.
3. Dry mortar can match different kinds of new construction materials by improving formulation.These good properties not only improve building’s quality and life greatly,but also decrease the usage of mortar in a large degree.
4. The demand for dry mortar has increased rapidly due to its outstanding merit comparing with the mortar mad in work-site.
4.Technical Parameter for 20-25T/H dry mortar
Name | Parameters | ||
Total Power | ≥77KW | Standard | |
Productivity | 15T/h |
| |
Feeding capacity | 2.0m³ | ||
Discharge capacity | 2.0M³ | ||
Working cycle | 150S | ||
Electric power supply | 380V 50HZ | Three-phase five wire cable | |
| Voltage fluctuation ≤±5%; Frequency change≤±0.5HZ | ||
Supply transformer | ≥200KVA | ||
5.Detailed pictures of 20-25T/H dry mortar
Contact Namecard: