Raw material of dry mortar:
1. Cementing material: cement, lime, plaster.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
5. Chemical additives.
Descriptions of full automatic dry mixed mortar production line:
MG series high quality automatic dry mixed mortar production line is based on the latest design concept in Europe, this production adopts the advanced computer autocontrol system, whose production capacity can reach 30-100 thousand tons per year depend on the system configuration.
Working principle of full automatic dry mixed mortar production line:
According to requirements of the customers, the system can be equipped with 3-6 bulk storage bins. Cement and flyash will be filled to the silos by pump truck, then the cement, sand, flyash and additives will be conveyed to the metering and batching system for dosing, the material in which will, after being processed by the metering and batching system, be conveyed to pending-for-mixing bin, and then fed into the highefficiency biaxial agravicmixer for continuous mixing. The finished product in conformity with mixing accuracy requirements can be sent to the finished products bin shortly after mixed.
Moreover, there is design with automatic rationing and packaging machine at the bottom of finished products bin, allowing for synchronous autopackaging operation. Featured with easy and convenient operation, high efficiency, it can both obviously reduce labor intensity and effectively reduce dust pollution.
Features of full automatic dry mortar production line :
1. It features magnificent appearance, good quality, high productivity and accurate mortar proportioning.
2. The dry mix mortar production line uses a centralized control system, making the equipment easy to operate.
3. According to the layout type, it can be classified into tower type, self tower type and series type. Its up to the customers workshop area. The needed area is 500~5000m2.
4. We can provide onestop service from design to installation according to our customers' specific requirement.
Main configuration of automatic dry mixed mortar production line:
1, Raw material storage silo
2, Bucket elevator
3, Spiral conveyor
4, Weighing system
5, Mixer
6, Finished product bin
7, Packing system
8, Dedusting system
9, Computer control system
10, Air compressor
11, Steel structure
Note the use of dry mortar equipment
1, a mixer under normal use, you need to pay attention to the operator to assure the equipment should be regularly inspected and maintained, if the equipment is found abnormal operation or operations shifted positions,turn off the power timely,After all-round the inspection and maintenance,please check for proper use and operation.
2, dry mortar production line equipment, the degree of mixing into an ideal mix, random mix, and incomplete mixing of three states
3, when a sudden power failure, you should release the material in the mixer and then start the machine.
4, The mixing degree of the materials in dry mortar production line equipment, depends on the proportion of materials to be mixed, physical state and properties, as well as the type used in mixing machine and mixing operation duration and other factors.
5, the mixer Liquidity is very poor, granular or powdered solid adhesion occurs each other, is often required mechanical mixing machine turning and pressing, rolling and other activities join.
If you want to know more about our dry mortar plant, please send us inquiry or contact us directly.
Packaging & Shipping
1.Delivery time: 30 days after receipt of your deposit.
2.Payment terms: 30% T/T in advance, the balance is paid (by T/T) before delivery.
3.Package:
1).Wire cables are used for fastening the machine on the trailer or inside the container.
2).Cork wood are placed in front or behind the machine to protect it.
3).Plastic film is covered on the machine as a rain-roof.
4).Crane is used during the whole loading
Choose China Henan Better dry mortar mixer machines you will be able enjoy the following services:
1. Pre-sale services ----Act as a good adviser and assistant of clients; Enable them to returns on their investments.
2. Services during the sale ----
Respect clients; Devote ourselves to improving the total value
3. After-sale services ----
Provide considerate services to minimize clients' worries.
Warranty: 100% brand new when leaving the factory. The seller guarantee quality of the machines (excluding wearing parts)for a period of one year from the date of trial run finish under our technician's guidance, but not exceed 13 months from date on which machine leaves the factory.
Henan Better Heavy Industry Co.,Ltd has over 15 years experience in construction machinery.Our products all passed the certifications of CE & ISO9001! Our products sell well all over the country and exported to the outer Mongolia,Russian,Philippin,Macedonia,Tanzania,Cyprus etc.and won overseas customers' trust and good reputation.