Our company-Shandong Sinoking Dredging Equipment Co., Ltd,located in Qingdao city,Shandong province.We have ourself research team and our factory located in Weifang city,and we have more than 10 years manufacturing experience,and many trading companies cooperate with us,our cutter suction dredgers spread all over the world. But from last year,we do trading business by ourself,so we can provide you the best cutter suction dredger.Please contact with us-Sinoking company!
The cutter suction dredger is a combination of mechanical and hydraulic dredgers. In order to ensure the quality of underwater dredging (ie, the flatness of underwater submarine after excavation and the depth of dredging), it must be used on the hull. The landing gear of the steel piles and steel piles or the three-cable positioning device is positioned to move the ship forward and backward. The left and right traversing swing of the hull is traversed by the left and right transverse anchors connected to the dredge reamer bridge.
The depth of dredging is reflected by a depth-deploying sensor mounted on a bridge or winch, which is controlled by the operator. After the underwater reamer is rotated to break the soil, a centrifugal vacuum mud pump at the rear end of the suction pipe inlet is used to generate a certain vacuum at the suction inlet. The mud stirred by the reamer is sucked into the mud pipe with water and then passed through the mud pipe. The sludge pump after the mud pump transports the slurry to the prescribed dumping area. If the distance to be transported is far, it will be transported by the inboard pump installed in the hull.
Type | 3000m3/h Cutter Suction Dredger (14 inches) |
Overall Length*Width*Height | 40*8.1*6.2m |
Main Hull | 14*3.5*2.2m |
Max Dredging Depth | 18m |
Mixture Capacity | 3000m3/h |
Charge Distance | 1500m |
Dredging Pump Manufacturer | Shijiazhuang Pump |
Engine Manufacturer | Cummins/Weichai/Mannheim |
Diesel Engine Power | 947kw |
Cutter Diameter | 475mm |
Ladder Winch | 1 set |
Swing Winch | 2 set |
Spud Length | 18m |
Spud Diameter | 510mm |
Spud Thickness | 20mm |
Spud Quantity | 2 pcs |
1. The cutter is driven by a low speed and high torque hydraulic motor, cutter shaft is supported by dual-column center adjustable spud.
2. The dredger is consisted of mud pump(pump impeller and cover is made by Cr.26 material), driven by diesel engine through high-elastic shaft coupling and gear box (with Electric Clutch).
3. The dredger winch and bridge winch are driven by hydraulic motor.
4. A shaft alternator provides the whole ship power while working, includes: diesel pump, fire pumps, fans, lighting etc.
5. A berth generating set provides the electric power when the dredger is idle, which includes as follows:
Lighting, air-conditioning and ventilator.
Deck cranes, emergency Hydraulic Pump Group and other necessary auxiliary equipment.
Choose us is your correct decision:
1. We compare price and quality for you from dozens of products.
2. We check our own factory and inspect it before purchasing.
3. According to your requirement, we’ll recommend different equipments for you, not limited to one or two.
4. We offer lowest price with best value.
5. We have a group people to serve you, will have very good service before and after sales.
6. We can supply as big as a whole vessel, as small as a pin. One-stop buying will save you much time and energy.
7. Re-inspection after production and before shipping, make sure best quality comes to you from beginning.
8. Our team will go to the port to see loading etc, and share with you pictures and vedios, to make you feel you are at site to monitor all.
9. Our payment term is varied, your any payment term is possible at our side.
Our services:
♦ Pre-sale services: Passion & Thoughtful
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
♦ Sale services: Oversea Technicians
Oversea technicians will be sent to the jobsite for guiding the installation training operators and finishing the check and accept together with you.
♦ After-sale services: Faithfulness
One year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
Click here to find more !
&What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
1). What is the dredging depth(m) from the water surface?
2). What is the water flow (m3/h) of the dredger/pump are you interested in?
3). What is the Max. charge distance(m)of the dredger to the river bank?
4) What is the Max, altitude (m) from the dredger to the appointed place on river bank?
Thank you for the cooperate and look forward to your inquiry, hope have a nice day!