Steel Glass Door

 Steel Glass Door
Structure features:
1.Door skin is made of white or various PVC coating steel plate which produced from Bao Steel.Its thickness is between 25-26 gauge(0.5mm) standard,and can be changed as per your requirement.With galvanized steel plate as the base plate,it is made through degreasing,cleaning,chemical conversion,primer painting and finish painting.The coating thickness is greater than 20um,having good weatherproof nature,corrosion resistance,flexibility and glossiness.
2.Two fillers can be chosen:polyurethane or solid polystyrene foam.The advantages of polyurethane are:higher density,harder,heavier,higher index of sound insulation&heat protection.
3.The door frames are made of high-quality solid wood.After drying and epidemic prevention processes,the moisture index will be less than 12%.
 
specifications:
- Suitable for Exterior or Interior door
- Galvanized cold rolled steel panels with double primer.
- 1 1/4" thick kiln-dried,primer coating pine stiles and rails.
- 12" wood lock block for reinforced mounting of the lockset and/or deadbolt.
- Injected polyurethane foam core for minimum thermal transfer.
- 4"*4"hinges and standard cylindrical lock set preparation available.
- 2 1/8”diameter face bore.
- 2 3/8"or 2 3/4"backset.
- 1"edge bore with 1"*1 1/4" latch plate routing.
- Drive-in or square mortise edge preparation available.
- Factory primed semi gloss white Standard. Vinyl coatings available.