1.products picture: fiberglass bathroom door
2.How To Order: fiberglass bathroom door
2. Remove all the hardware and mask off anything you don't want stained such as the glass insert.
3. DO NOT SAND GRAINED FIBERGLASS.
4. Wipe the door with mineral spirits to clean any dust or residue from the surface. Allow door surface to dry completely before applying stain.
How To Strip The Stain
•Kutzit™
•Dad's Easy Stripper™
•3-M Safest Strip®
NOTE: If selecting other products to strip the stain, make sure to read the warning against use on fiberglass.
How To Stain PF Frames
2. Remove all the hardware and mask off anything you don't want stained.
3. DO NOT SAND GRAINED PF FRAMES.
4.Wipe the jamb with mineral spirits to clean any dust or residue from the surface. Allow jamb surface to dry completely before applying stain.
How To Paint Woodgrain Doors
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.DO NOT SAND GRAINED FIBERGLASS.
4.Wipe the door with mineral spirits to clean any dust or residue from the surface. Allow door surface to dry completely before applying stain paint. Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
5.Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6 sides. Doors which have been bored and morticed for hardware should be primed inside of the lock bore as well.
6.The primer must be completely dry before applying the topcoat.
How To Paint Wainscoting
2.Thoroughly wipe the wainscoting with water or an appropriate cleaner such as Sherwin-Williams Pro Clean Professional Prep Wash Concentrated Cleaner to clean any dust or residue from the surface. Acetone will also work well.
3.Allow wainscoting to dry before applying paint. Do not use hydro-carbon based solvents to clean the wainscoting, as such products may leave a residue.
How To Paint Smooth Skin Doors
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper.
4.Wipe the door with acetone to clean any dust or residue from the surface. Allow acetone to dry from the surface before applying
5.Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
6.Apply primer with a 4" brush beginning with the panels. Follow the manufacturer's instructions for drying time before applying topcoat. Continue to apply theprimeto ALL 6 sides. Doors which have been bored and morticed for hardware should be primed inside of the lock bore as well.
7.The primer must be completely dry before applying the topcoat.
How To Paint PF Frames
2.Remove all the hardware and mask off anything you don't want painted, such as the glass insert.
3.Lightly scuff sand the surface with a Scotch Brite pad or fine sandpaper.
4.Wipe the jamb with mineral spirits t to clean any dust or residue from the surface. Allow to dry from the surface before applying paint. Do not use hydro-carbon based solvents to clean the surface as such products may leave a residue.
How To Trim A Trimmable Door
How To Measure A Rough Opening
How To Replace A Door Slab
How To Install A Dentil Shelf
CAUTION: Make sure your work area is well-ventilated. Keep adhesive away from heat and flame. Avoid any contact with eyes and skin. Read warning label on adhesive box.
Sample Time & Charges
1. Sample Time |
1) Ready samples could be offered immediately |
2) Samples need to make based on client’s request, 7-10 days after getting sample charges. |
2. Transportation |
Samples can be sent by DHL/FEDEX/UPS/TNT/EMS etc according to client’s request. |
3. Sample Charges |
Samples could be charged depending on different items, refunded after order placed. |
Company Advantage
1). Fast Response We answer all inquiries quickly within 12 hours, whether they arrive via email, fax or letter. |
2). Competitive Prices Our large volumes of production allow us to offer excellent prices. |
3).Strict Quality Control We inspect all the goods before shipments to ensure that the quality is as guaranteed. |
2).Respect to Delivery We gain the greatest capability to ship on time and accurately with our computerized management system in the industry. All the deliveries will not exceed 30 day. |
3).Strong R&D Team We are always researching and developing innovative products to provide our clients with new opportunities in their markets. |
4).Professional After-Sales Service Regular order tracking & customer interaction make us build a good reputation in the worldwide markets. |