rgb dmx controller 5v/12v/24v

Specifications

Direction for use

1,  Connect the load wire at first, following by the power wire; Please ensure short circuit can not           occur between connecting wire before you turn on the power:

2,  Adopt RF control,there are four keys altogether, and every key-press function as follows:

        Program: pattern key,lighting color will change if you press one time;

        Speed up: to speed up lighting color changing;

        Speed down: to speed up lighting color changing;

        On/off: Power switch,you could turn on/off controller in any state.

3,DMX digital console:

The DMX controller address code corresponding to the channel for the red (R), address +1 code corresponding to the channel for the green(G), address+2 code corresponding to the channel for the blue (B), For example, the address code+1, CH1 controll of red(R) color, CH2 controll of green(R) color, CH3 controll of blue(B) color, The DMX channel vale (0-255) greater, the brightness will be more higher. It have 256cgray-scale arbitray modulation, and can achieve the purpose of mixes light. The acquiesce DMX code address is CH1, you can buy the DMX address editor of us to modify the address you may want.

4,Standard color changes as follows: