HUADA EV48-50 HAWKER LiFePO4 48V50AH
Hawk 24V, 48V lithium iron phosphate battery
Nominal voltage: 24V/48V Nominal capacity: 20-200AH Service temperature: charging 0~45 ℃, discharging - 20~60 ℃ Application field: AGV, mobile robot, industrial machinery and equipment, emergency power supply, etc
Order model nominal voltage (V) capacity (Ah) size
(mm) Weight
(Kg)
HOKE EV24-30 25.6V 30 390 * 199 * 130 9
Hawk EV24-40 1.0 25.6V 40 315 * 237 * 165 17.5
Hawk EV24-40 2.0 25.6V 40 527 * 155 * 170 17.5
Hawk EV24-60 1.0 25.6 60 333 * 241 * 214 25
HOKE EV24-60 2.0 25.6 60 325 * 237 * 187 25
HOKE EV24-80 25.6 80 356 * 335 * 216 29
HOKE EV24-100 25.6 100 356 * 335 * 216 34
Hawk EV24-120 25.6 120 400 * 275 * 248 41.5
Hawk EV24-200 25.6 200 551 * 210 * 433 65
Hawk EV48-20 48 20 315 * 237 * 165 17.5
Hawk EV48-30 48 30 380 * 238 * 202 21.4
Hawk EV48-40 48 40 356 * 335 * 216 32
Hawk EV48-50 48 50 788 * 170 * 170 36
Hawk EV48-60 1.0 48 60 567 * 241 * 226 40
HOKE EV48-60 2.0 48 60 430 * 350 * 216 40
Hawk EV48-100 48 100 614 * 346 * 202 65
Hawk EV48-160 48 160 606 * 456 * 255 86.5
Hawk EV48-180 48 180 600 * 275 * 517 95
Hawk EV48-200 48 200 700 * 555 * 294 130
The battery specification can be customized. For more information, contact Hawk Battery Wang Zelong
Battery type: lithium iron phosphate battery
Maximum charging current: 2C
Maximum discharge current: 2C
Instantaneous discharge current: 3C
Discharge cut-off voltage: 23.6V/43.5V
Charging temperature: 0~45 ℃
Discharge temperature: - 20~60 ℃
Storage temperature: - 20~60 ℃
Temperature protection: 65 ℃± 5 ℃
Battery shell: sheet metal shell
Port design: foreign port
Lithium battery protection: short circuit protection, overcharge protection, over-discharge protection, over-current protection, temperature protection, etc
Communication interface: 485, CANOPEN, CAN, AO (0-5V represents 0-100%), DO (2-way), DI, etc
Application fields: AGV, mobile robot, industrial machinery and equipment, emergency power supply, etc
Product features
Fast charging: It supports 2C fast charging and can be fully charged up to half an hour.
Anti-dazzle plug: different plug specifications can be used for charging and discharging to avoid wrong insertion.
Port design: charging and discharging interface design, supporting charging and discharging without disturbing each other.
Self-developed BMS:
The battery management system for mobile robots has rich communication interfaces.
It can store and export fault data.
The control system is designed with extremely low power consumption. Shutdown state 30uA, startup state 30mA
Support various non-standard function customization.
Environmental protection and long service life: adopt automobile grade power lithium iron phosphate battery, with high cycle life, in line with the value concept of low carbon, energy conservation and environmental protection;
Professional design: through the design of shockproof structure filled inside the cold-rolled sheet metal shell, the requirements of strong heat dissipation, high safety and high reliability are met.
Hawk's lithium iron phosphate battery will consume a lot when it is at low power. Don't wait until the battery runs out of power before charging. This will speed up the battery loss. The lithium iron phosphate battery's long-term power level of 40% - 60% can make it the longest life.
Use high-quality lithium iron phosphate battery charging equipment to charge. Overvoltage and over-current charging are not allowed. Maximum charging voltage of 24V battery 29.2V; The upper charging voltage of 48V battery is 54.7V. The battery life of lithium iron phosphate battery will be reduced by over-voltage or over-current during charging and discharging or excessive temperature. When the lithium iron phosphate battery is overcharged and discharged or the temperature is too high, the battery should be suspended and reused after finding out the cause and eliminating the improper factors.
Under the use mode of shallow charging, shallow discharging and frequent charging and discharging, the battery shall be fully charged once a month with a current lower than 0.5C to correct the analog output of SOC.
There are two circuits in the Hawk lithium iron phosphate battery, one to charge the battery and the other to power the equipment through the power supply. When charging, the device uses power supply. The plug connection between battery charging and discharging port and external charging and load shall be correct and reliable. The charging port (CHARGE) cannot be used for discharging; The discharge port (DISCHARGE) cannot be used for charging, otherwise it will damage the internal control circuit of the battery.
When the Hawk battery START light flashes, press the button gently to observe the power indicator. If the indicator is on for 5 spaces, it indicates that the battery is fully charged and the battery is overcharged. At this time, it is necessary to stop charging the battery. If the indicator light is not lit at all, it indicates that the battery has been discharged and the battery has been over-discharged for protection. At this time, it is necessary to stop the battery discharge.
Turn off the Hawk battery when it is not in use. If it is not used for a long time, the battery should be fully charged and stored, and attention should be paid to moisture and dust prevention. The battery shall be charged and maintained every three months.