LINDE Lead Acid Battery HAWKER 24V 3PZB330AH
LINDE Lead Acid Battery HAWKER 24V 3PZB330AH
Hawk forklift battery HAWKER PzS
HAWKER | The traction forklift battery produced by Hawk Power Supply Co., Ltd. is currently advanced in technology and technology, and is also widely used in the industry. For example, many famous brand manufacturers such as forklifts, locomotive tractors, electric cleaning vehicles, and electric tour buses all use HAWKERPZS traction batteries. It conforms to DIN standards, mainly supporting European standard forklift trucks such as LINDE, HANGCHA, JUNGHEINRICH, HYSTER, BT, STILL, etc. It conforms to JIS/BS standards, and is mainly equipped with JIS/BS standard forklift trucks such as NICHIYU, TOYOTA, TCM, KOMATSU, SHINKO, NISSAN, etc.
Monomer structure
HAWKER traction battery uses mature tubular positive plate technology. The positive plate adopts die-casting grid, and the active material is stored in the manifold made of polyester material; The negative plate uses reinforced plate type plate. There are many micropores between the positive and negative plates, and there is a convex diaphragm on one side. The shell of the battery monomer is made of polypropylene material with high impact resistance and high temperature resistance, and the shell cover is heat sealed to prevent the leakage of electrolyte.
Pole terminal
Each positive and negative terminal is cast with lead alloy and copper core terminal with internal thread. The combination of the pole and the compressed sealing rubber ring can effectively prevent the leakage of the electrolyte.
Single battery connection strip
The cells are connected by fully insulated halogen-free flexible connection strips. The way of fixing the connecting strip with bolts can make it easy and fast to take out the monomer from the battery pack for maintenance or replacement.
Safety valve
Each cell is equipped with a safety valve to allow the gas generated during charging to escape. The operation of adding purified water and measuring the specific gravity of electrolyte can be carried out through the safety valve. The safety valve also has a baffle for battery to prevent electrolyte surge.
Battery cover
The battery cover is designed to install electrolyte stirring system or temperature sensor after punching.
Hawker Aquamatic centralized automatic water filling system
Hawker Aquamatic centralized automatic water filling system can add water to all battery cells in the battery pack from the central point of the battery system. As shown in the previous figure, the water filling safety valve of the system can automatically maintain the optimal liquid level of the battery monomer, and also allow the gas generated during charging to escape and measure the specific gravity of the electrolyte.
Electrolyte agitation system
Hawker electrolyte circulating agitation system is based on the principle of air lift and uses the pipeline system installed on the battery to work. The diaphragm pump blows the low-speed air flow into the battery, so that the air flow circulates in the battery shell. The system can effectively prevent electrolyte delamination and ensure charging optimization.
advantage
● With higher capacity under the same overall dimension
● Higher discharge efficiency
● Longer running time and higher reliability
● Effectively integrate DIN and BS standards in European standards in terms of capacity and size
HAWKER Hawk traction battery with electric electrolyte stirring system
● Avoid stratification of electrolyte and temperature during partial or full charging
● Optimize the charging acceptance process of the positive and negative plates of the battery, so that the bearing capacity of the positive and negative plates is consistent
● Compared with the traditional charging method, the charging time is reduced by 30% and the energy consumption is reduced by 20%
● Avoid stratification of electrolyte and temperature during partial or full charging
● Optimize the charging acceptance process of the positive and negative plates of the battery, so that the bearing capacity of the positive and negative plates is consistent
● Compared with the traditional charging method, the charging time is reduced by 30% and the energy consumption is reduced by 20%
Electrolyte layering Electrolyte circulation
HAWKER Hawk ® The size of PzS type traction battery (with bolted solid connection bar) meets the requirements of DIN/EN 60254-2 and IEC254-2 'L' series standards.
Hawk LPC intelligent charging station
Product features This product is designed for automatic guided vehicle/electric forklift and other applications.
The product is composed of basic power module N+1 in parallel, which can meet the maximum power application of 24V240A/48V200A.
The whole machine adopts the controller specially developed for the application requirements of AGV trolley in automatic production line,
Realize logic control, system protection, parameter setting, charger management, upper communication and other functions, and use 7-inch full-color touch screen to realize human-computer interaction.
The system has the following features:
Super power, 240A@24V / 200A@48V
Hot plug mode, N+1 redundant fabric protection
Ultra-large power density, compact volume
Support current expansion and upgrading
Standard efficiency up to 92%
Multiple use modes (fast charging, interactive charging, balanced charging, maintenance charging)
Provide IO port for system interlocking protection
With industrial communication bus (CAN/MODBUS/PROFIBUS DP)
High protection safety level (IP54), designed for industrial applications
Protection characteristics
● Overheat protection: when the internal temperature of the charger exceeds 75 ℃, the charger will be shut down protectively, and when the temperature drops, it will automatically resume charging.
● Short-circuit protection: when the charger output is unexpectedly short-circuited, the charger will automatically shut down the output, and restart charging after 10 seconds delay after troubleshooting.
● Reverse connection protection: when the battery is reversed, the charging machine will cut off the connection between the internal circuit and the battery, and will not start charging, nor will there be any damage.
● Input low voltage and overvoltage protection: when the input AC voltage is lower than 185V or higher than 265V, the charger will be shut down for protection, and will automatically resume operation after the voltage is normal.
2、 Technical indicators
● Rated input voltage: AC220V ± 15%
● Rated frequency: 45 ～ 65 Hz
● Battery pack voltage: 48V
● Full-load efficiency: ≥ 93%
● Maximum charging current: 100A
● Equalizing and floating charging: automatic completion
● Battery type: lithium iron phosphate battery (the charging program has been set before leaving the factory. If it needs to be set again, it needs to be conducted under the guidance of professional personnel)
● Shutdown mode: automatic, or timing, or automatic shutdown after disconnecting the charging plug
● Cooling mode: forced air cooling
● Display mode: LED digital meter with LED light to indicate charging status
● Mechanical impact and seismic grade: meet the requirements of SAEJ1378
● Protection grade: IP66
● Working temperature: - 5 ℃~+45 ℃
● Storage temperature: - 30 ℃~+70 ℃
● Charging control: temperature compensation control, never overcharge or under-charge
● Connector configuration: ANEN350A
Product specification
Voltage level
24V system
48V system
Model
LPC120-24
LPC180-24
LPC240-24
LPC100-48
LPC150-48
LPC200-48