New Genius & Flash Point OBDII/BOOT Protocols ECU Chip Tunning Tool
Top 8 Reasons to Get New Genius Touch & Map Programmer:
1. Newest Hardware: 5.005.003, Newly Add More ECU Models, Like VAG DQ500 and VAG DQ250 New Genius Software Free Download
Top 8 Reasons to Get New Genius Touch & Map Programmer:
1. Newest Hardware: 5.005.003, Newly Add More ECU Models, Like VAG DQ500 and VAG DQ250 New Genius Software Free Download
2. Master Version
3. Multi-Language: English,Italian,German,French,Spanish,Portuguese,Hungarian
4. The New Genius supports CAN-BUS, KWP and J1850 Protocols and Has Communication Modules Available for the Following Vehicles:
Cars
Bikes
LCV
5. World’s first Touch & Map device, allows reading / programming the ECU in modern vehicles over OBD2
6. Updated Version of Kess V2, Support More Vehicles
7. No tokens limitation. There is 30 tokens by default, after the tokens use up, you can simply press tokens reset button to reovery.
5. World’s first Touch & Map device, allows reading / programming the ECU in modern vehicles over OBD2
6. Updated Version of Kess V2, Support More Vehicles
7. No tokens limitation. There is 30 tokens by default, after the tokens use up, you can simply press tokens reset button to reovery.
8.Genius Touch & Map Programmer includes SS77 ECM 1.61 and Winols 2.24 for free
The New Genius is controlled through a system of icons from your TOUCH PANEL touchscreen, this makes it extremely easy to use. A standard 16 pin OBD cable is included and specific connectors to work on making diagnosis and special cables to do so through direct connection to the connector or plate ECU.
Notice: Can be installed on both Windows XP and Win7.
Key Features:
Easy to use thanks to its touch screen and intuitive menu.
Completely independent of the PC during the phases of read / write.
System automatic backup.
SD 1 GB expandable memory (expandable to 16 GB)
System updates via USB.
Technical Specifications:
ABS plastic enclosure with ergonomic grip system safe.
LCD display 320 x 240 pixels, CCFL back light with Touch Panel.
Flash memory chip 512K bytes protected.
16 MB RAM memory.
SD card of 1 GB expandable.
LED status SD.
Internal clock with memory.
Lithium 3 volts.
Rechargeable battery 600 mAh 8.4V.
Supply voltage from 12V to 30V.
Communication via K line, L line, CAN-bus 2.0 and J1850.
SS122 XP Operating System CD
SS122 XP Operating System CD
Available in Master
As a consequence of the requests received from the market, a specific software has been developed for the independent management of New Genius called DS Manager. This is dedicated to skilled tuners who prefer to develop tuned files with third party editing software. DS Manager can decrypt and encrypt files received from New Genius, so allowing the possibility to export files for the modification. No editing functions are supported. Also for this specific software, a specific tool for the automatic checksum recalculation is provided.
New Genius Master Compared to Best Kess V2 Master:
| Product Name | New Genius | Best Quality Kess V2 (SE87-D) |
| Language | English, Italian, German, French, Spanish, Portuguese, Hungarian | English, German, Spanish, Italian, Portuguese, French |
| Software | -- | V2.15 |
| Hardware | V5.05 | V4.036 |
| Tokens | No Tokens Limitation,30 Tokens come with device by default, you can press the tokens reset buttonon the back of hardware to get new Tokens | No Tokens Limitation, there is renew buttonon the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens. |
| Update | via hardware | via hardware |
| Support Protocols | Supports CAN-BUS, KWP and J1850 protocols | Line, CAN, EDC17 and MED17 and Ford J1850 |
| Support Vehicle | Car, Bikes, LCV Support more new vehicle than Kess V2 | Car and Bike |
| PC | Hand-held ECU Chip Tuning Tool, no PC need; software is inside the machine already directly to use | PC-based ECU Programmer, you need install the software by yourself |
| Method | Read and Write ECU via OBD2 directly | same |
1. ECU Chip tunning software: it is unfriendly and you are supposed to be skilled enough to use it.
2. Boot wiring diagram and instruction.
3. K-touch setup software: the folder "setup3" contains "setup3 manually.zip" and "setup3 xp automatic.exe" , xp user just directly click "setup3 xp automatic.exe" and follow the prompt to operate; win7 user firstly extract file "setup3 manually.zip" and get "raceloc.dll", then manually replace raceloc.dll C:UsersYour PC NameAppDataLocalDimWareRaceEVO7.0.
4. TF FIX folder contains a video on how to reset the TF program. Note: change other TF card is not allowed, you have to use the built-in TF card.
5. How to renew the token video demo. After renew the machine get 30 tokens.
6. Install read me. Txt: contain simple setup instructions.
7. K-touch vehicle list for reference.
8. K-touch install on win7 procedure. Note: disconnect the network connection when you install and use k-touch, update device and software is not allowed.
9. K-touch install on windows xp procedure. Note: disconnect the network connection when you install and use k-touch, update device and software is not allowed.
10. Decompression software
FAQ:
FAQ:
Q: Can i use new genius edite the ECU file and write it to new ECU?
A: For all our ECU programmer up to now, like New genuis, K-TAG, Kess v2 and fgtech. All can read the data from Old ECU and write it to new one. But cannot change or edite the ECU data you read out from the old ECU. If you want to change, you can choose ECM TITANIUM on our website, or something enable you change the ECU file. Then use our ECU programmer to write it to new ECU.
Another thing you need pay attention is, after you change the data, you need to use the tool which you use to change the data to do checksum.