Cortex-A8 OK210 single board computer 512M RAM 512M NANDFLASH

OK210 single board computer is based on Samsun S5PV210 processor, Cortex-A8 architecture. It’s main frequency can reach 1Ghz. Its operating temperature falls at -10℃~70℃. OS Android 2.3/4.0, WinCE6.0 and Linux 2.6.35 are all available. Also, custom boards are welcome. There are abundant software resources with stable test drivers. All kinds of Audio &Video jacks are available:
Support HDMI Audio&Video sync output
Drivers and source code of infrared remote control decoder are provided
QT4.7 test program and source code
Support a lot of cameras, such as: OV3640, OV9650, OV5640 AND TVP5150
High quality 200pin DIP connector

FET210 CPU Module Features
 Architecture: Cortex-A8
 Processor: Samsung S5PV210 chip
 Main frequency: up to 1GHz
 RAM: 512M Byte DDRⅡ
 Flash: 512M Byte SLC NandFlash
 Working Temperature: -10 ~ +70
 Dimensions:    .0cm*7.0cm
 Voltage: 5V
 Storage temperature: -40 ~ +85
 Humidity: 70% (non-condensing)
 OS: Win CE 6.0, Linux 2.6.35, Android 2.3/4.0
 23x EINT, 39x GPIO
 LCD: RGB 24-bit
 EBI BUS: 16-bit parallel bus
 CVBS: 1x CVBS
 1x IIS
 2x IIC
 2x SPI
 2x 3-line, 2x 5-line
 1x USB HOST 2.0
 1x USB OTG 2.0
 2x SD/MMC
 10x ADC, including 1x 4-line resistive touching interface
 8*8 matrix keypad is available(optional)
 1x CAMERA
 Support 2D/3D graphic acceleration
 1x HDMI

OK210 Base Board Features
 LCD: RGB 24-bit
 HDMI: Support
 S-Video: Support
 10x ADC
 1x CAMERA interface
 2x IIC
 2x SPI
 4x UART(2x3-line, 2x5-line)
 1x USB HOST
 1x USB OTG
 1x IIS
 2x SD/MMC interface(1x SDIO WiFi, 1x SD card)
 1x 10/100M self-adapted Ethernet port
 1x JTAG
 23x EINT
 Boot Configurate Pins: Support SD card and Nand Boot
 Audio: Support WM8960 with 3x 3.5mm standard stereo audio socket: one audio output for earphone, one audio input for microphone, one for Linein.
 4x LEDs
 Temp Sensor     18b20 temp sensor
IR Reveiver
 HS0038B
 Reset     1x reset
 Switch     DIP switch for system boot setting
 Power Jack     1x power jack
 Camera      Support OV3640, OV9650, OV5640, TVP5150 camera
 RTC    1 x CR1220 button battery for RTC clock
 Push-button    
 8x buttons

Android
Android 2.3.4 Software Features
 Version: Android 2.3.4 (Android 2.3.3 is also available)
Flashing Method:
  Support flashing image file to NandFlash via SD card(yaffs2 file system), which is most convenient for user installation;
  Support SD and SDHC card.
 Kernel: Linux-2.6.36.2
 Cross-compiler
  Android cross-compiler without extra installation;
  The kernel and Uboot compiling adopt 4.5.1 cross-complier;
  Support FPA and armv6 instruction set.
 U-Disk
  Support plug-and-play SD card and U-disk, source codes and driver are provided.
 USB- Bluetooth
   Plug-and-play;
   Support data transmission with mobile phone;
   Driver and source codes are provided
 3G WAP
  Support 3G dialing-up;
  The driver and source codes are available
 USB 3G Network Card
  Support 3G WAP such as WCDMA, CDMA2000, TD-SCDMS;
  Plug-and-play;
  Support both USB 3G module and mini PCIe 3G module;
  Drivers and source codes are available
 Ethernet: Support
 USB WiFi: Support. Obtain IP address and DNS automatically. Driver and source codes are provided.
 SDIO WiFi: Support. Obtain IP address and DNS automatically. Driver and source codes are provided.
 CMOS Camera: Support. Provide 2.6.36 kernel driver and application source codes.
 ADB Synchronization Function: Support
 Precisely Touch:  Support
 Touch Screen Calibration: Android will automatically run the calibration interface as it is booted the first time.
 Button: Support
 Serial Port:  Support
 LED, PWM, I2C Tests, etc.: Support, and also provide with all programs source codes and development files.
 System Compiling: OS Android one-key compiling without script or codes modification.