EQ1061T used 63032-RS Water pump 17*47*15.5 17X47X14 17X40X12 shaft with factory price list Deep groove ball bearing

 

Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. Contact a BHR sales engineer for details.

 

Single row deep groove ball bearings with filling slots have a filling slot in both the inner and outer rings to accommodate more balls than standard deep groove ball bearings.

 

Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots, but their axial load carrying capacity is limited. They are also unable to operate at the same high speeds as bearings without filling slots.

 

Deep groove ball bearings with filling slots are available open or with shields on one or both sides. They are also available with or without a snap ring groove. Open bearings that are also available with shields may have recesses in the outer ring.

 

Large size deep groove ball bearings with filling slots, without cage, are available on request.

 

 

Specifications: Single row deep groove ball bearings
Bearing Clearance	C3, C4, C0
Bearing Bore Size d	3-1500mm
Closure type	open, rubber sealed, metal shielded, 2RS, RS,  ZZ, 2Z
Bearing precision	P0 P6 P5 P4
Bearing material	Bearing steel, Gcr15, chrome steel, stainless, ceramic
Bearing cage material	nylon, steel, brass, bakelte
Number of Row	single row, double row
Bearing Lubrication	dry, oil, grease

 

 Deep groove ball bearing with snap ring size list:

 

Bearing NO.	I.D		O.D		W		Load Rating(KN)		Steel Ball Parameter		Max Speed		Weight Kg
	d		D		B		Dynamic	Static	NO.	Size	Grease	Oil
	mm inch		mm inch		mm inch		Cr	Cor		mm	r/min	r/min
6300	10	0.3937	35	1.3779	11	0.4331	8.2	3.5	6	7.14	23000	27000	0.053
6301	12	0.4724	37	1.4567	12	0.4724	9.7	4.2	6	7.94	20000	24000	0.060
6302	15	0.5906	42	1.6535	13	0.5118	11.4	5.45	7	7.94	17000	21000	0.082
6303	17	0.6693	47	1.8504	14	0.5512	13.5	6.55	7	8.73	16000	19000	0.120
6304	20	0.7874	52	2.0472	15	0.5906	15.9	7.9	7	9.53	14000	17000	0.140
6305	25	0.9843	62	2.4409	17	0.6693	21.2	10.9	7	11.5	12000	14000	0.230
6306	30	1.1811	72	2.8346	19	0.748	26.7	15	8	12	10000	12000	0.350
6307	35	1.3779	80	3.1496	21	0.8268	33.5	19.1	8	13.5	8800	10000	0.460
6308	40	1.5748	90	3.5433	23	0.9055	40.5	24	8	15.1	7800	9200	0.630
6309	45	1.7716	100	3.937	25	0.9843	53	32	8	17.5	7000	8200	0.830
6310	50	1.965	110	4.3307	27	1.063	62	38.5	8	19.1	6400	7500	1.050