Symons Cone Crusher Manufacturer

Specifications

The main parts of jaw crusher is fixed body frame, chassis manufacturing process, there are two: carbon steel casting of carbon steel welded steel frame and chassis. Welded frame is in the original cast of the rack on the addition of a number of ribs. According to the inlet width size into large, medium and small three, inlet width is greater than 600MM for large machines, inlet width in medium-sized machines, inlet 300-600MM a width of less than 300MM for small machine. of Symons Cone Crusher Manufacturer

Jaw crusher sudden shutdown: Clear the discharge port blockage, ensuring a smooth flow of material; 2) tighten or replace V-belt; 3) reinstall or replace adapter bushing; 4 ) alignment workplace voltage, to conform to the requirements of the host operating voltage; 5) Replace the bearings. Jaw crusher after a period of time, should bear the hub again tightened to prevent loosening tight bushing damage the machine.

Features

Symons Cone Crusher Manufacturer Long Service Life, Large Feeding Size, Large capacity, Can do Hard Stones, Life Time Support,

Symons Cone Crusher Manufacturer Operation Notes:

Welded steel jaw crusher welded steel, no large-scale furnace equipment and the like. Relatively easy to spot. But for demanding welding process. And welded steel casing to a second overall warming, in order to ensure the welding flat horizontal force housing.

Maintenance & Attention

To Choose a Right Symons Cone Crusher Manufacturer

Cone Crusher Parallel with length in order to ensure that products meet the crusher crushing crushing the lower chamber required fineness and evenness, cone crusher are set for some parallel broken belt, the ore in the parallel band at least to accept a check of broken . Parallel with length L and crusher type and size related. For crushing cone crusher with L = 0.16D; for broken cone crusher with L = 0.085D. Where D is the maximum diameter of the cone movable lower part.