Sand making machine can be used to handle some materials such as pebble, calcite, granite, quartz, concrete, dolomite, bluestone, iron ore, limestone, construction waste, etc.
It is especial suitable for making building sand and paving sand.
Because of its low wearable feature, sand making machine is also used in high abrasiveness and secondary crushing industry. Besides, because there is no pollution for machine, sand making machine is well suitable for producting glass quartz sand and other high purity material industry. Its production capacity scopes is 10-500t/h., so sand making machine almost can satisfies all production requirement.
VSI Sand Making Machine Application
On the base of researching, developing and producing mine machinery for many years, and absorbing the advanced skills abroad, VSI series centrifuge impact crusher is successfully developed. It is a new generation high efficient crusher featured with energy conservation.
This crusher is widely used in the broken and plastic of metal and non-metal ores, building materials, sand making and kings of Metallurgical slags. It is applied to brittle materials with compression strength under 9 grade Moh's hardness. It can not be used to Sticky material and the stones which embodied much earth.
Working features of sand making machine:
1. Simple structure and low running cost.
2. Less wear and using the principle of stone hitting stone.
3. High crushing efficient and lower power consumption.
4. It have grinding and coarse grinding function.
5. Less influence by materiel humidity and the materiel humidity can get about 8%.
6. The working noise is lower than 75db and the dust pollution is less.
7. It is applicable to grind the hard and medium hard materiel.
8. The production shape is cube and its bulk density is small. The iron pollution is less.
Working Principle of sand making machine:
Material falls into the fast rotating impellers from the top of machine and crushes with the material distributed around the impeller under the effect of high speed centrifugal force. After the impact with each other, the material is crushed between impeller and cabinet and is discharged from the bottom. It can cycle many times with the close circuit and the sizing device will control the granularity of finished products.
Main technical parameters of sand making machine
Type | VSI 7611 | VSI 8518 | VSI 9526 | VSI 1140 | |||
Capacity | Waterfall and center input | 120-180 | 200-260 | 300-380 | 450-520 | ||
Full center input | 60-90 | 100-130 | 150-190 | 225-260 | |||
Max. Feed size(mm) | soft material | <35 | <40 | <45 | <50 | ||
hard material | <30 | <35 | <40 | <45 | |||
Rotation rate(r/min) | 1700-1890 | 1520-1690 | 1360-1510 | 1180-1310 | |||
Double motor power (kw) | 110-150 | 180-220 | 264-320 | 400-440 | |||
Overall dimension L*W*H (mm) | 4100*2250*2285 | 4140*2280*2425 | 4560*2450*2780 | 5100*2690*3200 | |||
Weight (t) | 7.8 | 10.3 | 16 | 25.6 | |||
Voltage | AC 380V, 50Hz | ||||||
Vibrating sensor | Monitoring range :0.1-20mm/s | ||||||
Lubrication hydraulic station | Rate of flow (L/min) | 6 | |||||
Double oil pump power | 2*0.31 | ||||||
Protection | Double oil pump complementary to ensure oil supply; auto stop when no oil flow or no oil pressure; water cooling, motor heater in winter
| ||||||
Overall dimension L*W*H (mm) | 820*520*1270 | ||||||
Fuel tank heater power | 2 | ||||||
VSI Sand making machine delivery
- Stone crushing production line 5-500tph
- Sand making production line 50-200tph
- Ferro & Non ferro beneficiation process line (Au, Cu, Mo, Pb, Zn, Mn, Fe, Mn, etc)
- Industrial drying equipments (For sand, gypsum, filter cake, peat, biomass, clay, fertilizer, bentonite, Kaolin)
- Powder grinding equipments 80-200 mesh ( limestone, cement clinker etc)
- Cement/ Lime/ LECA production line with rotary kiln
Our Honors
Our Service
Pre-sale:
1. Depending on customer's requirement, we insist on "making profit at lowest investment" and choose best machine.
2. Design the most reasonable project and maximum customers' profit.
3.Provide engineers to scene to plan work site.
4. Provide equipment list,design drawing, construction drawing, equipment install drawing.
During-sale:
1.Depend on scene, draw design drawing , construction drawing, equipment install drawing. 2.Manufacturing products strictly on contract while customer constructing.
3.Testing ex-work, delivery, customer acceptance.
After-sale:
1.Provide engineer to wok site guiding install.
2.Test equipment after installation, training operators.
3.Visit work site regularly
Please do not hesitate to contact with us for more details!