EV charging plug/IEC62196-2 type 2
EV charging plug descriptions
The ANEN Electric Vehicle EV charger is a IEC vehicle solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.
The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.
EV charging plug Features
With automatic locking feature to prevent accidental disconnection while in charging effective use of personnel safety protection also the battery and car electronics;
Help prevent fingers from accidentally touching live contacts;
Thisproduce can set up many codes based on different voltage, prevent mis=assembly;
Resistance to harsh working conditions, Anti-UV;
This kind of products peer in the same products fully interchangeable;
Meets IEC62196,SAEJ1772 specification.
EV charging plug technical parameters
| Item | Value |
|
Rated Current |
Contact pinA:5A~30A Contact pinB:60A~100A Contact pinC:60A~100A |
| Insulation Resistance | 500Ω |
| Insulation Material | PA |
| Contact Materal | Copper, Plated With Silver |
| Actuating Force | ≤100N |
| Rated Voltage |
Contact pinA:48V DC Contact pinB:400V AC/DC Contact pinC:600V DC |
| Contact Resisitance |
Contact pinA:≤5mΩ Contact pinB:≤1mΩ Contact pinC:≤1mΩ |
| Flame class | UL94- V0 |
| Protection degree | IP65 |
|
Operation cycles |
10000 |
| Environment Temperatures | -40°C···+75 °C |
EV charging plug application
- Home EV Charging Units
- Public Charging Stations
- Roadside Assistance Trucks
- Fleet Trucks
- EV Mass Transit Vehicles
- Electric Watercraft
- Passenger Vehicles
- Electric Motorcycles
- Electric Agriculture Vehicles