I. Brief Introduction:
1) Stirring conveying JBT is suitable for small or medium -scale rural & civil construction, mined, road and rail tunnels, water resources and hydropower engineering etc.
It can be through a trailer loader traction, mixing, screening and pumping process is done by an operation.
2) The first diesel engine rack rotary coupling, so that transport compressed, expand use that reduce the lateral dimensions of the transport process, and more convenient
to use, save labor, unique mixing and pumping unit pull rail connection mode, easy to replace piston.
II. Parameter:
Terms | Units | Parameters | ||
Transfer Pump
| Maximum Theoretical Output | m³/h | 30 | |
Theoretical Maximum Pumping Pressure | Mpa | 9 | ||
Theoretical Maximum Conveyor Height | m | 140 | ||
Theoretical Maximum Transmission Distance | m | 350 | ||
Distribution valve |
| The S tube placed valve | ||
Conveyor Cylinder | mm | Φ180×1000 | ||
Master Cylinder | mm | Φ100/Φ70×1000 | ||
Bucket Capacity | L | 450 | ||
Discharging Diameter | mm | Φ150 | ||
Duct Diameter | mm | Φ125 | ||
Motor Power | Kw | 37 | ||
Voltage | V | 380 | ||
Full Oil Pressure Of Pumping System | MPa | 30 | ||
Full Oil Pressure Of Mixing System | MPa | 14 | ||
Maximum Mixing Speed | r/min | 24 | ||
The Concrete Slump Degrees Range | mm | 80~200 | ||
Aggregate Maximum Diameter | mm | Grait 40,Macadam 30 | ||
Concrete Mixer
| Mixing volume | m³ | 0.5 | |
Mixing Motor Power | Kw | 5.5 Kw×2 | ||
Lifting Motor Power | Kw | 5.5 Kw | ||
Voltage | V | 380 | ||
Dimensions | mm | 4270×2350×2980 | ||
Weight | Kg | 3300 | ||
Commercial conditions | ||||
Manufacture time | 5-7 working days after receiving down-payment. | |||
Quotation validity | 30working days from date of our quotation. | |||
Payment Terms | 30% deposit paid by T/T against Proforma Invoice;70% balance before the shipment. | |||
Quality | The executive standard is GB10171-2005, which is accepted by the world. ISO9001:2008 Quality certification. 3. Seller guarantees that the Commodity hereof is 100% brand-new. | |||
Warranty | 12 months |
II. Features:
1. We adopt the PPG car painting for our concrete mixer with pump, from the picture, you can see that our machine looks very good, the surface is bright and smooth.
2. The outlet hole is specially designed as the coarse type, which is wear-resisting and can prolong its service life.There is a tripod at the rear of this machine, it is very convenient to move from place to place.
3. The arch broken structure is equipped on the machine which can avoid the concrete plug, insuring the smooth working of the concrete mixer.
The S valve of the concrete mixer with pump is cast into shape with austenitic manganese steel which has long service life.
4. It is equipped with the hydraulic oil scale for check the volume and temperature of hydraulic oil.
Other products in DASION