BM1K Silver Colors
BOYET Series
Product Name/Model:BM1K Silver Colors
Characteristic:BM1K Silver Color with excellent leveling property,easy construction,excellent adhesion power and coveraging power,can match all kinds of solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV and bus.
Substrates | Well-Sanded, Completely dried and good existing finishes as bellow: | ||||
Surface Cleaning | Wash by warm soap, remove wax, silicon and other contaminations with | ||||
Mixing Ratio | BM1K Silver Color | Thinner | |||
1 | 1 | ||||
＜15℃ | BM1K Silver Color | BYTX-1 Fast Thinner | |||
15-30℃ | BM1K Silver Color | BYTX-2 Standard Thinner | |||
＞30℃ | BM1K Silver Color | BYTX-3 Slow Thinner | |||
Spray Viscosity | 14-16s to drop off, in 4# viscosity cup at 25°C, | ||||
ReTreatment | After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. | ||||
Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 3-5kg/cm 2 | ||||
Spray Technology | Coats&Thickness: 2-3 coats, total 15-20um. | ||||
Shelf Life | 2 years in original sealed can, cool and dry place at 25℃. | ||||
Package | 1L×12 or 3.75L×4 | ||||
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to
avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.
