Leak Repair with Polyurethane Injection Resins
High pressure waterstops
Leakage Crack Waterstops1 Component Type Polyurethane
Polyurethane injection resin, used during construction of tunnels, other underground constructions to prevent infiltrating water
WPU
Model Number: | IP-11 |
Place of Origin: | Shanghai China |
Viscosity: | ≤1000 m Pa· S |
Usage: | Waterproof Injection |
State: | Liquid |
Exterior Appearance: | Transparent maple Liquid |
Density: | ≥1.0 g/cm3 |
Packing Unit: | 20KG / 10KG/ can customize |
Main Raw Material: | Polyurethane |
Brand Name: | Ruth |
Mixing Rate: | 1 Component Type |
Foaming Percentage: | ≥350% |
Safety Caution Matter:
- During application please wear protection (ex. Glove, goggle, masks), avoid to direct contact to skin, if happen please use running water to flush, if contacted to eyes need to go to hospital for medicate care immediately.
- Our polyurethane is solvent based material, during application needs to have good ventilation and away from any fire.
Storage
Store indoors with good ventilation, keep away from fire and sunlight. 6 month’s shelf life, if store in the original container.
Package
20KG/10KG special made iron pail.
Standard Package
NOTE:
We are speicalize in the whole series of water stop system: high pressure injection pump, injection packer, Polyurethane grouting material, epoxy injection resin, etc.