DY-Acrylic Waterproof Coating
Brief Introduction
Single unit acrylic acid elastic waterproof coating is a emulsified coating with the key material imported from abroad and mixing with the good adjuvant and filler. It contains no poison, taste and pollution, which can be used directly on the wet or dry bricks, mortar, concrete, metal, rubber, plasterboard and other bases. Also it can be used as the indoor or outdoor paints or binders.
Features
1.Can be used in wet area directly.
2.No poison, no taste, no pollution, simple operation.
3.Excellent resistance to crack, water, aging, changeable weather.
4.Can be made into different colors according to client’s requirements.
Application procedure:
1.The base shall be clean before application, keeping no loosing and water on the leveling layer , shall stir in the barrel when gatherring every time to avoid precipitation, if there is precipitation, shall be mixed prior to application.
2.Brush with roller or brusher.
3. After application
Cautions:
1.The waterproof layer shall be brushed twice according to requirements of Acrylic Waterproof Coating.
2.Coating to be as even as possible, without local precipitation; and shall brush twice to keep the coating and base to be stick firmly, without bubbles.
3.Drying time of coating has relatioship with construction site temperature,humidity,ventilation condition, thy drying time will be long if there is low temperature,very humidity and poor ventilation in construction site, instead, the drying time will be shorter.
4.The amount of coating must be in accordance with the provisions of reclaming, can not be too thick or too thin.
Data sheet
Guangdong Province Contruction Products Inspection Center | |||
Test Report | |||
Sample name:DY-Acylic Waterproof Coating | Ref No:GD2011-01-00137 | ||
Specifation/modle: DY-PEW-i | Sample No:011-01-00137 | ||
Ref Standards:JC/T864-2008 | Sample quanity: 3kg | ||
No. | Test Item | Standard value | Measured value |
1 | Solid content,% | ≥65 | 76 |
2 | Tensile strength, Mpa | ≥1.0 | 1.2 |
3 | Elongation,% | ≥300 | 357 |
4 | Cold flexibility | -10°C, no cracks | No cracks |
5 | Watertightness, (0.3Mpa, 30min) | No leakage | Pass |
Conclusion | All test are qualited based on the Ref Standards:JC/T864-2000 's conventional items and instruction . | ||
Remarks | ___________ |
Guangzhou Dayu Waterproof Co., Ltd
Guangzhou Dayu Waterproof Co., Ltd was founded in 1995, which is a hitech company on waterproof material R&D, manufacturing, sales and construction. Our registered capital is 50 million, we have 20000 square meters production base, about 8000 square meters plant as well as specialized construction team and waterproof materials factory. Now we have two sets of full automatic temperature control production equipment, one set of full automatic powder mixing dispersion equipment and one set of full automatic liquid mixing dispersion equipment, coating annual production capacity can reach 20000 tons. We introduced foreign advanced production technology for polymer modified bitumen waterproof membrane production line which has excellent equipment performance, membrane annual production capacity can reach 15 million. In addition, we increased the 4m production line except the original 2m production line of synthetic high polymer membrane, the annual production capacity can reach 6 million square meters.
To meet production demands, we have increased 200 million to build a largescale modernized production base in Qingyuan overseas industrial park, at the same time, we also introduce foreign advanced automatic production equipments, build a number of wide and synthetic polymer modified bitumen waterproof membrane production line, produce new type green environmental protection products and meet the social requirements.
We have the spirit of “ Quality first, Credit first” for customers. Under the support from all walks of life, our business has been booming. Twenty years focused on waterproofing, it has developed into a high visibility and reputation in the industry of enterprise.
Thanks for Your Attention