Specifications
VIT wall paint gives strong binding power, maintenance of defects and cracks on basis.ISO9001, China 3C certificate
VIT interior & exterior sealing primer paint application main features:
VIT exterior & interior sealing primer paint Model no.:SWA-0001 | |
Product features |
Strong binding power Maintenance of defects and cracks on basis |
Application | Suitable for kinds of interior and exterior wall decoration, special exterior wall. |
Application method | Spray |
Technical parameter | By spray way: Putty : water =100:≤35 Sanding time should be ≥24 hours later
|
Packing details: | 20L |
Construction samples | Putty powder SWZ-0001 Dry time: at least 24 hours Sanding with 320# sanding paper Painting alkali resistance series primer Coating weight 10-12sqm/L/one coat Repaint one coat, interval ≥2 hours
|
Note:
1. Stir the paint thoroughly before use.
2. Pour the paint and hardener together, following the proportion stipulated on the label strictly, mix thoroughly and then filter the mixture with 200# filter screen. To avoid bubbling, let the mixture stand for 15 minutes before use.
3. To achieve a better coating performance, seal the base wood with VIT sealer.
4. The added thinner will vary from application conditions.
5. Seal the paint can tightly if it is not used up at one time.
6. Method: Brush, roller, conventional spray and airless spry.
Thinning:
1. We strongly recommend you to use VIT matched thinner to achieve the ideal coating performance. Adjust the thinning ratio according to needs.
2. No dilution before the paint and hardener are thoroughly mixed.
3. Mix thoroughly before use.
Notes for use
1. Thick painting is not suggested to avoid pin holes and bubbling of the paint film.
2. Try to use our matched products and do not add other chemical elements in the paint.
3. Do not apply when the temperature is below 5°C and RH is 85% or above.
4. If moisture content of the wood exceeds 12%, dry it first.
5. The paint film is easy to crack and peel off if the wood putty is not completely dry or thoroughly sanded.
6. Each layer must be dry enough and sanded thoroughly before the application of next step or it will cause blushing or peeling off of the paint film.
7. The work area and application tools should be maintained clean to avoid bad coating performance.
8. Select paint according to the wood and arts and crafts.
Caution:
1. Extremely inflammable liquid, keep away from sources of ignitions. Store in a cool, dry and well-ventilated place.
2. Avoid contact with eyes, skin and clothing. In that case, immediately flush eyes or skin with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists.
3. For professionals use only. Keep it out of reach of children and away from food, beverages etc.
Warm tips:
1. In order to better guarantee the lawful right and interest of the consumers, it is not recommended to purchase products without full label identification. Beware of counterfeit.
2. The product is only to professionals, the details of product information refer to Uses manual.
