Specifications
1. extrussion coating PE laminator bopp2. extrusion coating BOPP film laminator coating unwoven fabric paper hot melt extrude
JzLM90-1500 Paper And plastic Coating Machine, extruding coating machine, hot melting coating machine, wet lamianting machiner, wet extrusion coiating and lamianting machinery, bopp coating machine, bopp film coating machine, extruding coating machine, pe extruding coating and laminating machine, bopp lamianting machine. bopp lamiantor, bopp coating and laminating machine, bopp coating and extruding coating laminator.
Main technical data
NO. | Character | specification |
1. | Mould | Diameter 90mm, L/D: 32:1 |
2. | Mould material | 38CrMoAl,hardness treatment, surface with Nitride |
3. | T-die | New type featheredge mould |
4. | Gear box | High strength hard tooth surface reduction gear box |
5 | Corona treatment | Intellectualize digital corona treatment |
6 | range | 50gsm ~ 250gsm roll paper with surface coating |
7. | Coating material | Squeeze complex level PP, PE |
8. | Coating Thickness | 0.012-0.070mm (single layer) |
9. | Coating width | 1100-1500mm |
10 | Symmetrical degree of coating | ±6% |
11 | Peel off strength | 3-5N/30mm(according to the coating basic material |
12. | Max extruding capacity | 220kg/h |
13 | Mechanism speed | 0~150m/min |
14 | Unwinding systerm | Double shaft turning and winding without reducing speed |
15 | Unwinding tension | Vector frequency conversion motor |
16. | rectifying system | automatic correcting device (EPC) |
17 | Rectifying journey | ±100mm |
18. | Deviation rectifying precision | ±0.5mm |
19 | Unwinding diameter and rewinding diameter | 1200mm |
20. | Rewinding systerm | Friction rewinding |
21. | rewinding tension | vector frequency conversion motor |
22. | Pneumatic roller for unwinding and winding | 3 inch (diameter: φ73mm); |
21 | Total power | About 150kw |
22. | Size (L×W×H): | 9500mm×8200mm×3200mm |
23 | Total weight | About 20,000 kg |
Key parts brand list
NO. | part | Brand |
1. | Breaker motor | siemens |
2. | Inverter motor | ABB |
3. | inverter | invance |
4. | encoder | omron |
5. | Air cylinder | Taiwan |
6. | PLC mould | mitsubishi |
7. | T-die (steel material) | Jinjiang (German # 2738) |
8. | Temperature meter | omron |
9. | Tension controller | mitsubishi |
10 | Human interface | taiwan |
11 | contactor | schneider |
12 | Air parts | Kortis (france) |
13 | Lower friction air cylinder | Intay |
Key parts warrantee time:
NO. | PART | WARRANTEEE |
1. | T-DIE | 12 month |
2. | Silica roller | 3 month |
3. | Laminating roller | 12 month |
4. | screw | 24 month |
5. | PLC systerm | 12 month |
6. | Inverter | 18 month |
