Specifications
3G clamp1.ISO 9001:2008 certification
2.full range of sizes are available
3.with 3G nut
For fastening:
Pipe lines,such as heating,sanitary and waste water pipes,to walls,ceilings and floors.
Properties:
| Material: | steel DD11(material no.1.0332) acc.to DIN EN 10111 |
| Zinc plating: | electro zinc plated,6-8µm |
| Resistance welded nut: | M8/10 1/2",H=18.0mm |
| Locking screw: | combi-slot cheese head screw |
| Acoustic insulation lining: | material:EPDM;chlorine-free;silicone-free |
| Sound insulation: | for DIN 4109 |
| Temperature range: | -50° to +110°C |
| Hardness: | 45+-5° Shore |
| Fire behavior: | DIN 4102:class B2 |
Advantages:
1.Two screws pipe clamp with compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.
2.Screws have a combined head with a cross and a slot.
3.The pipe clamp is checked regarding noise protection according to DIN 4109.
4.It prevents the action of electrolysis.
5.Two-screw pipe clamps satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations
Application:
1.Used for mounting of pipes to the walls (vertical / horizontal),ceilings and floors
2.For Suspending Stationary Non-Insulated Copper Tubing Lines
3.Being fasteners for pipe lines such as heating,sanitary and waste water pipes;to walls,ceilings and floors.
4.Side screws are protected against loss during assemble with the help of plastic washers
Usage:
1.steel pipes
2.cast iron pipes
3.copper pipes
4.glass pipes
5.plastic pipes
Field:
1.sanitary and heating installations
2.gas distribution systems
3.air conditioning systems
Technical data:
Installation:
Insert pipe,press together clamp parts,tighten locking screws.