Liquid Magnetic Separators

Liquid Magnetic Separators / Magnetic Liquid TrapMagnetic Protection Against Tramp Iron ContaminationMagnetic Separator or Magnetic Liquid Traps are designed and engineered to remove ferrous tramp,Website: www.ur-brand.net www.ur-brand.net www.ur-brand.nethttp://www.gmexm.com, metal Impurity from liquid processing and conveying and slurry lines.Efficiently remove tramp iron and metal before maintenance and product contamination problems occur. The benefits of this liquid magnetic separator can be experienced in most cases with no appreciable pressure drop or reduction in flow rates.All units incorporate a sump type SUS 304 or 316 housing to trap non-ferrous particles. Liquid Traps may be installed horizontally, vertically, or on an angle without affecting their magnetic efficiency, according to customer’s specific application.They provide dependable protection against tramp iron contamination and come equipped with powerful, strong magnetic field and high working temperature Neodymium magnets to capture even magnetic debris like work-hardened stainless steel fragments. The Liquid temperature can be 250C max.Advantages of magnetic separator:-Powerful Rare Earth Neodymium Magnets to remove even the smallest ferrous particles from liquids with a higher viscosity.-High Temperature Rare Earth Magnets are standard for temperatures up to 250C.-Easy clean. Easy spot check the magnetic bar for contamination with unique Clean In Place (CIP) design.-Free maintenance cost.-Reduce production downtime.-With manual or fully automatic cleaning systemsSpecification:Liquid line magnets are available in line sizes from 1-1/2" to 8" diameter. Standard 2", 3" & 4" Line Diameter, 1/2″ and other sizes available upon request. 2″ Diameter is available for immediate shipment.Operation: As liquids or slurries are pumped through the Liquid Trap separators, ferrous contaminants adhere to the magnetic tubes or magnetic bar. The design and construction allow the tramp iron to go around the downstream side of the tubes where it is safely out of product flow and washoff is prevented. Cleaning job is achieved by removing the top plate and removing the magnetic assembly from the housing. The housing is designed not only to protect the magnet, but also to act as a sump, to reach the easy-clean and fast-clean goal.The related products you may interest: