Specifications
Poly aluminium Chloride PAC1.Low impurity
2.High molecular weight
3.Superior coagulating effect
4.HS:28273200
Polyaluminium Chloride PAC
1. Form flocculant in high speed, big block and high activity. And sedimentation and seperation is rapid.
2. Do not add other chemical additives and use less dosage than other inorganic congulant so that the cost is low.
3. Apply to a wide range of PH value. It has a strong adaptability and good effect for high-turbidity and high-temperature, low-turbity and low-temperature or organic contaminated water.
Application
Poly Aluminium Chloride(PAC) can be used in the clarification of drinking water, polluted industrial wastewater and industrial sewege.
Usage
1. Solid PAC should be used after being dissolved in water and the dilution ratio is generally 2%-20%( weight percentage )
2. The dosage is generally 1-15g per ton. Meanwhile, the specific dosage should be subject to users' actual experiment considering the specific water quality and turbidity.
Quality Index
Standard | GB/15892-2009 | GB/T22627-2008 | ||
Index | For Drinking Water | For Waste Water | ||
Liquid | Solid | Liquid | Solid | |
AL2O3(%)≥ | 10.0 | 29.0 | 6.0 | 28.0 |
Basicity (%) | 40.0~90.0 | 30~95 | ||
Water insoluble, %≤ | 0.2 | 0.6 | 0.5 | 1.5 |
PH and Value | 3.5-5.0 | 3.5-5.0 | ||
Fe%≤ |
| 2.0 | 5.0 | |
Arsenic (As), ppm ≤ | 0.0002 | 0.0005 | 0.0015 | |
Cadmium (Cd), ppm≤ | 0.0002 |
|
| |
Chromium (Cr), ppm≤ | 0.0005 |
|
| |
Pb%≤ | 0.001 | 0.002 | 0.006 | |
Hg%≤ | 0.00001 |
| ||