Product Description
Application
FRP centrifugal fans are widely used in chemical industry, electroplating, oxidation, power plants, laboratories, circuit boards, environmental protection equipment and other occasions containing corrosive gases.
FRP centrifugal fans are widely used for ventilation, dust removal and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and induced draft of boilers and industrial furnaces; cooling and ventilation of air conditioning equipment and household electrical equipment; drying and selective delivery of grains; air source of wind tunnels and air cushion boats. The general FRP centrifugal fan can be used in the occasion of
corrosive gas, discharging corrosive gas. the transmitted gas is not allowed to contain viscous substances, dust and hard
particles less than or equal to 150mg/m3, gas temperature less than or equal to 60 degrees, and relative humidity less than or equal to 100%. It is not suitable to use FRP centrifugal fan in high temperature place.
corrosive gas, discharging corrosive gas. the transmitted gas is not allowed to contain viscous substances, dust and hard
particles less than or equal to 150mg/m3, gas temperature less than or equal to 60 degrees, and relative humidity less than or equal to 100%. It is not suitable to use FRP centrifugal fan in high temperature place.
Details Images
The general FRP centrifugal fan can be used in the occasion of corrosive gas, discharging corrosive gas. The gas conveyed is not allowed to contain viscous substances, dust and hard particles less than or equal to 150mg/m3, gas temperature less than or equal to 60 degrees, and relative humidity less than or equal to 100%. FRP centrifugal fans are
not suitable for high temperature places.
not suitable for high temperature places.
Type F4-72 | Air intake | Circular outlet | Boundary dimension | |||||||||||||
A1 | A3 | N-Md1 | B1 | B3 | F | G | A | |||||||||
H | D | 2.8A | 280 | 355 | 6-MB | 250 | 330 | 350 | 230 | |||||||
245 | 315 | 100 | 3.2A | 320 | 385 | 6-MB | 280 | 380 | 385 | |||||||
240 | 275 | 350 | 120 | 3.6A | 360 | 430 | 6-MB | 300 | 380 | |||||||
435 | 290 | 285 | 390 | 140 | 4A | 400 | 475 | 8-MB | 380 | |||||||
480 | 495 | 330 | 320 | 445 | 145 | 4.5A | 450 | 520 | 8-MB | |||||||
400 | 500 | 535 | 360 | 355 | 470 | 165 | 5A | 500 | 570 | |||||||
10-MB | 450 | 550 | 590 | 435 | 390 | 535 | 175 | 6A | 600 |
As the name implies, FRP centrifugal fan is a kind of centrifugal fan made of FRP anti-corrosion material. Its working principle is that when the motor rotates and drives the fan impeller to rotate, the gas between the blades in the impeller also rotates, and these gases are thrown out under the action of centrifugal force. The gas flow rate increases, so that the kinetic energy is converted into static energy in the flow, and then with the flow of fluid
Pressurization, so that the static pressure can be converted into the speed energy, and the gas is discharged through the exhaust port, and a certain negative pressure is formed in the middle of the impeller. Due to the negative pressure at the inlet, the external gas is immediately added under the action of atmospheric pressure, and the gas is continuously discharged and added under the continuous rotation of the impeller, so as to achieve the purpose of continuous blowing. Under the same power, the air pressure and air volume are generally inversely proportional. Under the same power, if the air pressure is high, the air volume will be relatively low, and if the air volume is large, the air pressure will be lower, so as to make full use of the efficiency of the motor.
Pressurization, so that the static pressure can be converted into the speed energy, and the gas is discharged through the exhaust port, and a certain negative pressure is formed in the middle of the impeller. Due to the negative pressure at the inlet, the external gas is immediately added under the action of atmospheric pressure, and the gas is continuously discharged and added under the continuous rotation of the impeller, so as to achieve the purpose of continuous blowing. Under the same power, the air pressure and air volume are generally inversely proportional. Under the same power, if the air pressure is high, the air volume will be relatively low, and if the air volume is large, the air pressure will be lower, so as to make full use of the efficiency of the motor.
Working principle of frp centrifugal fans
As the name implies, FRP centrifugal fan is a kind of centrifugal fan made of FRP anti-corrosion material. Its working principle is that when the motor rotates and drives the fan impeller to rotate, the gas between the blades in the impeller also rotates, and these gases are thrown out under the action of centrifugal force. The gas flow rate increases, so that the kinetic energy is converted into static energy in the flow, and then with the flow of fluid Pressurization, so that the static pressure can be converted into the speed energy, and the gas is discharged through the exhaust port, and a certain negative pressure is formed in the middle of the impeller. Due to the negative pressure at the inlet, the external gas is immediately added under the action of atmospheric pressure, and the gas is continuously discharged and added under the continuous rotation of the impeller, so as to achieve the purpose of continuous blowing. Under the same power, the air pressure and air volume are generally inversely proportional. Under the same power, if the air pressure is high, the air volume will be relatively low, and if the air volume is large, the air pressure will be lower, so as to make full use of the efficiency of the motor.
Packing and Shipping
Packing
Nude packing
Pallet packing
Delivery
15-30 days after receiving your deposit.
Related Products
Company Introduction
Our Company
Hengshui Aoliande Trading Co., Ltd is a professional sales of FRP pipe, FRP tanks, FRP pultrusion profiles, FRP molded products and complete sets of glass fiber reinforced plastic production equipment professional company, through the professional and technical development and the introduction, the company relies on advanced technology, exquisite craft, reliable quality and perfect service, and passed the ISO9001, ISO14001, OHSAS18001 management system certification, the company existing staff more than 50 people, annual sales of glass fiber reinforced plastic series of products 6000 tons, the products have been sold to all over the world,and other countries have won the support and trust of new and old customers.
Certifications
FAQ
Q1: Are you a manufacturer or a trading company?
We are the manufacturer of Hengshui Jiubo in China for more than 20 years.
Q2: Are you familiar with the export business? Which country are you selling now?
We are very familiar with export business. Up to now, more than 30 countries have imported from us.
Q3: What is the way of payment?
At present, we accept T/T and L/C. If there are other payment requirements, you can contact us.
We are the manufacturer of Hengshui Jiubo in China for more than 20 years.
Q2: Are you familiar with the export business? Which country are you selling now?
We are very familiar with export business. Up to now, more than 30 countries have imported from us.
Q3: What is the way of payment?
At present, we accept T/T and L/C. If there are other payment requirements, you can contact us.