Smok Removal Boiler Fan
1.Typical Feature and Application
This kind of Boiler centrifugal fan is suitable for the industrial boiler which are used to burns varies kinds of mineral materials and have smoke and dust exhausting equipment . The transited gas temperature is no higher than 80 centigrade.
2. Performance Range
|
Fan Type |
Boiler Centrifugal Induced Draft Fan |
|
Certificate |
CE,CCC |
|
Electricity Current Type |
AC(Alternating Current) |
|
Voltage |
380V |
|
Frequency |
50HZ |
|
Power |
1.5KW-90KW |
|
Speed |
1480-3000 RPM |
|
Air Volume |
1218m³/h up to 62850m³/h |
|
Static Pressure |
608 Pa up to 3756 Pa |
|
Motor |
Standard Motor |
3.Composition
|
Fan Housing |
Cast Iron Material with Powder coating |
|
Impeller |
Cast Iron Material |
|
Inlet and Outlet Ducts |
Connect with flanges |
|
Motor |
Standard Motor, cast Iron with pure copper |
4.Fan Operation
|
Before set up the fan, check gap sizes of all parts of the fan to make sure the rotating parts will not hit the fixed parts. |
|
When the fan is rotating, check the temperature of the bearing after the impellers reach normal speed. If there is no special request for the temperature of the bearing, it can not higher than ambient temperature 40 °c |
|
If the fan has very severe shock, hitting ,and bearing temperature rise rapidly, please stop the fan right away. |
5.Fan Certificate and Quality Control
By our efforts, our company Handun was selected as the member of China General Machinery Industry Association Ventilation Fan Branch. Our products enjoy good reputation among our customers . Our Products were awarded as "Brand-name and High Quality Products" by "China Quality Evaluation Center" &"Guangdong Branch of Social Servey Institute China"; Furthermore, a number of products are applied patents, which are up to the advanced standard. We are "Shandong Private Scientific and Technological Enterprise" and past the "National Industrial Products License Certificate". Energy saving axial duct fan and multi-blade centrifugal fan developed by our company obtained the standard certification, most of our products past the certificate of "CCC" and "CE". We are fully implementing ISO 9001:2008 Quality System
6.Maintain
|
Periodically clean the inner dust, dirt and other impurities |
|
Periodically check the fan to avoid rusting |
|
Change the lubricating oil after opening the fan .The lubricating oil shall be changed according to the actual situation. |
Industrial systems such as Coal-fired power, Metallurgy, Papermaking, Cement and Glass production, Chemical industry, Material handling, Sewage treatment, Waste incineration, Subway ventilation, environment protection, mine, metallurgy, petro-chemical, tunnel,Industrial boiler and Dust removal systems etc. , and wind tunnel
Shandong Handun Environmental Technology Co., Ltd is a leading international business company in China, mainly designs and manufacturers Centrifugal fan, Axial flow fan, Boiler induced draft fan and other Ventilation equipment and parts. Also customize fans water tank and cooling tower as requirements. Which are applied to industrial systems such as Coal-fired power, Metallurgy, Papermaking, Cement and Glass production, Chemical industry, Material handling, Sewage treatment, Waste incineration, Subway ventilation, Industrial boiler and Dust removal systems etc.
Main products : Centrifugal fan, Axial flow fan, Boiler induced draft blower and Industrial fans and parts, water tank and cooling tower
The principle of Handun is “Customer-oriented and Quality –focused” . We possess the CE and ISO9001:2017. Based on it, we endeavor ourselves to please our customer’s needs in all aspects with high quality products as well as service. So the Handun brand products are widely recognized by all over the world such as Egypt, Sudan, Saudi Arabia, Malaysia, Indonesia, Philippine, Japan, UAE, Mexico, Italy etc.