Specifications
1) It is widely used in Petroleum.2)Used in Chemical Industry
3)Used in Electric Powder
Non-asbestos mineral fiber
According to specified recipe, being melting in the resistance furnace and spurting and blowing by multi-roll centrifugal force into cotton fibers, and after being cut, separate, edulcorated and classified, Jinli Non- Asbestos Mineral Fiber is produced by the advanced techniques at present.
Physical and chemical properties:
SiO2 | Al2O3 | Fe2O3 | Ca+MgO | Na2O+K2O | |
32-55 | 7-21 | 1-6 | 35-50 | 1-3 | |
Gray Whitelight yellow | |||||
The average length ofL mm | 1.8-8 (Or according with customer needing ) | ||||
The average diameterD um | 3-8 | ||||
Vector burning 800 C° / h | 4-9% | ||||
Water content | 1.5% | ||||
Capacityg/cm3 | 15-25 | ||||
Slag ball content | 0.5(mm) above | none | |||
0.25(mm) under | 5-9 | ||||
Asbestos content | 0 | ||||
Use: Beause it owns heat-insulating property, water-resistance, noise-absorption and fine springy property .So It is now widely used in petroleum, chemical industry, electric power ,building materials and road surface .
JinLi Mineral Company has taken lead in developing and producing many kinds of function ,specialized fiber , which fiber is more slender more soft and simply operating by staff and with better intensity and also it is less dregs and easy to loose .
1).In the road surface to prevent crack of pavement, increase tensile strength, antiaging .
2)In the building materials and paint , with Thermal insulation and Fire protection,
Improve product strength ,Texture lighter ,Prevent Aging,Prevent Discoloratio
3)In Asbestos products glass fiber products& friction and sealing materials to improve product strength, thermal stability and antiaging.
