Specifications
sparkle sheet for sparkle effectsize:1.52x30m
Heat resistant:-50C to 200C
No glue leave after remove
High Strech rate
sparkle sheet for sparkle effect good as oracal 
Model | CM005 |
Product | Glitter film |
Thickness | 0.15-0.16mm |
Heat resistance | -50°C to +200°C |
Stretch rate | 33+ pascal |
Mask thickness before embossing | 11.5c |
Glue material | Imported removable glue |
Glue thickness | 0.03mm |
Glue weight | 30g/m2±2gm2 |
Gram weight of release paper | 140gsm embossing paper |
Thickness of release paper | 0.18mm |
Stand up against | water, dirt, grease, salt, weak acids oil |
Durability period | indoor 7-8 years, outdoor 5-6 years |
| Compatibility | Die cutting,car decoratioin,architectural decoratioin |
Colors available | Black,white,purple,orange,yellow,red,army green,pink,green |
Durability period | Indoor 7-8 years; outdoor: 5-6 years |
1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion
and clean any contaminants that may cause imperfections.
2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove
wrinkles
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles 4, you could buy the best
heat gun and car wrap squeegee in our company
Kind Reminds
1.No pasting in rainy or cloudy weather.
2.No waxing one week before the pasting of the car sticker.
3.No washing in 48hrs after the pasting.If there is crimp or crease or if the temperature is low,
better blow it with a hair drier first from a certain distance and then to paste.