Specifications
3D carbon fiber sticker-with air drain
-Removebale adhensive
-Size:1.52x30m
Top quaity 180g 3D carbon fiber sticker with ai free bubbles
Model | TXD |
Product | 3D carbon fiber |
Thickness | 0.2mm |
Heat resistance | -50°C to +200°C |
Stretch rate | 33+ pascal |
Mask thickness before embossing | 11.5c |
Glue material | Imported removable glue |
Glue thickness | 0.02mm |
Glue weight | 30g/m2±2gm2 |
Gram weight of release paper | 180gsm embossing paper |
Thickness of release paper | 0.15- 0.16mm |
Stand up against | water, dirt, grease, salt, weak acids oil |
Durability period | Indoor 7-8 years; outdoor: 5-6 years |
Compatibility | Die cutting,car decoration,architectural decoration |
Colors available | black,white,red,orange,apple green,blue,yellow |
Product Description:
1. Has a look & feel similar or better to carbon fiber bonnet and hard-top
2. Can be applied on interior and exterior surfaces of a car (hoods, trunks, side view mirrors etc.
3. Can be applied easily on all the common car paints
4. Cost-effective and can be cleaned with detergent and water.
5. Without residual glue on the car after remove
6. Service life for outdoor 3-5 years, indoor 12 years
7. Adhesive backing with air release technology for a bubble free installation
Installation Tips:
1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles.
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles
Application:
Carbon fiber modification on engine hood, empennage, surrounding surface, car handle, rotary plate, etc. It's the desire of car fans.