Specifications
For car with OBDII connector
Speed/ temperature/fuel consumption display
Clearance showing on the windshield
Overspeed alarm
Car HUD head up display
*Parameter for HUD
| Accessories | OBD data line reflection paster host fixed pad specification |
| Display type | digital |
| Car make | All conform to the second generation of vehicle automatic diagnosis system (OBD II) models |
| Product Size | 125*75*15mm |
| Environment temperature | ~40c+80cAtmospheric pressure86-106kpa |
| Alarm sound level | >>=30db |
| Working voltage | 9v~16vdc(12vdc/70mA) |
| display information | Speed · engine speed ·fuel consumption · tire pressure.engine temperature · battery voltage |
| Showing information on the front windshield ofthe driver's eye level | |
- We are manufacture for all HUD, so our quote is lowest.
- We can do OEM/ODM for you.
- No matter pre-sales and after-sales, we provide close and long-term service.
- Our company spirit: quality for survival, innovation for development,serve for long cooperation
- Please contact us or directly send message to kellywang(at)v-starco.com,then tell us the model number, quantity,and any needs you want.
- We will make a performa invoice(P/I) to you for confirmation.
- After payment, we will arrange shipping in 1-3 business days (Sample order),3-10 days for official order(within 2,000 sets).
- Payment: Paypal, T/T
- Shipping: DHL, Fedex, EMS, Air mail etc.
- All products quality assurance.
- Keep tracking the order until you get the goods.
- Any problem about how to using HUD, pls feel free to contact us.
Q7 GPS HUD solutions to common problems
Question 1: Why the speed of HUD displayed is smaller than dashboard?
Answer 1:Considering driver security , car factory adjust the dashboard, and dashboard displayed speed is higher than HUD display, usually high 2-6 yards. If you want to set the HUD display the same speed as dashboard, please enter into the item 0 of the setting mode.That is why we often on the highway drive to 120 yards or more, but we were not photographed of over speed.
Question 2: Does you HUD can power on/off automatically? In addition, if there is manual switch function?
Answer 2: HUD can power on/off automatically. Usually after engine stop for 30s, HUD will power off automatically. When engine starts for 5s, HUD will power on automatically. In addition, HUD has the manual switch function. If you do not drive for a long time, please power off HUD by manual.
Question 3: Why after equip HUD, the fuel consumption is not correct or even there is no fuel consumption?
Answer 3: Maybe your car has the air flow meter, and need to set the fuel consumption.
- A. Please enter into the item 14 of setting mode to set the air displacement, the value is 2,3,…,100 means vehicle emission is 0.2 L,0.3 L ,…,10L respectively.
- B. Please enter into the item 14 of the setting mode, and set to 1,then enter into item 13 of setting mode to set reference fuel consumption.
Question 4: Why it is difficulty to set the unit of fuel consumption to L/100KM?
Answer 4: HUD can switch between L/H and L/100KM, that is fuel consumption per hour and fuel consumption of 100KM. Because when car stop, the L/100KM value is 0, and HUD switch to L/H. When the car speed is 5KM/H, HUD will switch to L/100KM.
If as above statement, HUD will display L/H when car stop, and display L/100KM when car start. If you want to set the unit of fuel consumption to L/H all the time, please enter into item 9 of the setting mode.
Question 5:How to find the total fuel consumption?
Answer 5: The total fuel consumption is the total distance you drove, when stopping car, HUD will auto off. Then the showed number is the total fuel consumption from you start the car to stop the car.
Question 6: How to clear the default code?
Answer 6:When HUD connected cars, please do not to start the engine, put the key to “ON” gear(if there is no key, please place to energized gear), and wait HUD to off. Long press the upside key for 5 seconds, then you will hear a "tick" sound from HUD, which means it finish the restore the factory settings.
Question 7: How to enter into the setting mode?
Answer 7: Plug in OBD—press switch five seconds then loose hand—showing big 107 and small 0 (888 and 88 will show, other place is black) —big 107 means set-up parameter, small 0 means the zero menu—press the big number to 117,small number to 1—press the big number to 100,small number to 2—recycling press to choose the parameter
HUD default menu and its corresponding parameter:
0-(107) 1-(117) 2-(100) 3-(25) 4-(25) 5-(0) 6-(120) 7-(0) 8-(0) 9-(2) 10-(1) 11-(1) 12-(0) 13-(70) 14-(20) 15-(132) 16-(0)
Question 8:The explanation of speed and revolving speed.
Answer 8:The default value of speed is 107, it stands for 107%. HUD is reading sensor data from car ECU, and dashboard is directly receiving sensor data. There is error in dashboard. Refer to the error, after getting the car ECU data, multiply by 107%,then show the data by HUD, and it is the same as dashboard. If the parameter is 100, then it shows the car ECU data, and is different from dashboard.
So is revolving speed.