High Quality NJP-1200 Fully Automatic Pill Capsule Filler Filling Machine
Product advantage
1.Independently develop and improve the internal design of the turntable, and adopt the original Japanese linear bearing, which is more accurate and longer service life than the counterparts
2.Under cam design, compared to counterparts, we increase the pressure of the oil pump, keep the lubrication in the cam groove, greatly reduce wear and tear, and prolong the service life of parts
3.The upper and lower modules design unidirectional movement and import the double lips polyurethane sealing ring, and the sealing performance is better
4.The control panel is eye-catching and intuitive, and adopts stepless variable frequency speed regulation
5.The lower surface of the measuring plate is adopted as the foundation, and the three-dimensional adjusting mechanism is more evenly distributed, and the difference of the loading quantity is more accurate
6.The utility model is provided with a safety protection device for a man and a machine, and has the automatic stopping device without material, so that the running of the machine is more stable, and the safety is more reliable
7.The utility model increases the ventilation of the module and combines the suction and the air to ensure the cleaning in the die hole without dust and improve the rate of operation on the machine
8.Independent design 2 chain wheel drives 2 dividing box separate division (general peer is a chain wheel drives the 2 indexing box) to reduce the resistance and share the operation pressure, increase the intensity of the operation, and the fault position is essentially zero.
Technical specifications and technical parameters
|
Specifications and type |
NJP-1200C Automatical hard capsule filler |
|
|
Technical
parameter |
Machine weight |
900kg |
|
Machine Dimensions |
1020×860×1970mm |
|
|
Motor power |
5.75KW |
|
|
Power Supply |
Three-phase four-wire |
|
|
Max.capacity |
1200 capsule/minute |
|
|
Suitable for Capsule Capsule |
00# ~ 5# and safe capsule A to E |
|
|
Making rate |
≥99.5% |
|
|
Noise |
≤75dBA |
|
|
Filling error |
(after granulation, the whole particle 40~80 particle filling)
|
|
|
compressed air |
0.06m3/min 0.3Mpa |
|
|
Water requirement |
Water ring vacuum pump with water distribution tank can also be used as an external water source |
|
|
vacuum degree |
-0.02~-0.06 MPa |
|
|
water flow |
250L/h |
|
|
Inlet pipe bore |
20mm |
|
|
Inner diameter of drain pipe |
27mm |
|
|
operating ambient temperature |
21℃±3℃ |
|
|
Height requirement of work building |
Artificial feeding is not less than 2.6m, vacuum feeding more than 2.8m |
|
|
Working environment relative humidity |
40~55% |
|
|
discharge rate |
300m3/h |
|
|
specific function |
Can increase the micro pill filling device; powder collector function (filling part of powder by another pipeline without recycling, disinfection, sterilization, can be directly added to the hopper filling) |
|
|
control systemn |
Variable frequency stepless speed control, PLC control |
|
|
material |
The direct contact parts with capsules and medicines are made of 304 and 316L high quality stainless steel |
|
1.12 months Warranty of Automatic Semi-Auto Powder Pellet Liquid Capsule Filling Machine.
2. Detail instruction and manual will be delivered with the machine.
3.Supply on line video and instruction
4.Send technicians to test the machine in customers' country if necessary.
5. Cusomters can send their technicians to learn in our factory.
