Product Overview
pvc wire cable extrusion machine Gongyi UT Machinery
contact:orionwhatsapp:0086-18236968979
FEATURES AT A GLANCE
500 meter/minuter cable machine
1. Power: 30KW AC motor + inverter
2. Gear box: 200 Grinding gear
3. Screw: 80mm, L/D=28:1, Speed: 10-110RPM, Material: SACM-2, surface hard chrome plating after nitriding treatment, suits for the extrusion of PVC, PE.
2. Gear box: 200 Grinding gear
3. Screw: 80mm, L/D=28:1, Speed: 10-110RPM, Material: SACM-2, surface hard chrome plating after nitriding treatment, suits for the extrusion of PVC, PE.
capstan
extruder
take-up
extruder
extruder the insulation layer
Screw: 80mm,
L/D=28:1
Drying machine and the automatic feeder
Capacity:100kg,
Attached to the hot air electric dryer , barrel temperature and heating time is set ,
electric heat and power plant 4KW
electric heat and power plant 4KW
Automatic feeding machine
Straightening wheel
Type: Horizontal five-wheel straightening wheel
Tension straightening: manual adjustment
The five-wheel guide wheel can be positioned in two or three directions up and down, and the relative position can be adjusted.
Tension straightening: manual adjustment
The five-wheel guide wheel can be positioned in two or three directions up and down, and the relative position can be adjusted.
Cooling tank
Supported with 3 U-shaped racks, with the height being adjustable American blow-off nozzle
The capstan
Double-wheel anodic oxidation surface strengthening
Upper and lower structures or left and right structures are adopted
Upper and lower structures or left and right structures are adopted
Features:
1. The extruder can work with TPU, NYLON, LSHF etc. thermoplastic compound by using different design screw.
2. With multi-layer extruder, use different crosshead, for single layer, single layer + color stripping/ skinning, double layer,
triple layer etc. extrusion.
3. Automatic material feed and dryer system.
4. With dual payoff or fly payoff and accumulator, non-stop production during change take-up bobbin.
1. The extruder can work with TPU, NYLON, LSHF etc. thermoplastic compound by using different design screw.
2. With multi-layer extruder, use different crosshead, for single layer, single layer + color stripping/ skinning, double layer,
triple layer etc. extrusion.
3. Automatic material feed and dryer system.
4. With dual payoff or fly payoff and accumulator, non-stop production during change take-up bobbin.
SALES AND SERVICE NETWORK
FAQ
For choosing proper machine, please read these bellow guides carefully:
1). What is the max and min size of the finish products. It is better offer the picture of sample or drawing of sample.
2). What capacity do you want? (kg/h)
3) Is there any special demand for electric parts? Siemens, Omron or domestic ?
4) What is your power standard(V, Hz)?
5) When do you want the machine? (Times for delivery)
6) Other requirements about the machine you want.
1). What is the max and min size of the finish products. It is better offer the picture of sample or drawing of sample.
2). What capacity do you want? (kg/h)
3) Is there any special demand for electric parts? Siemens, Omron or domestic ?
4) What is your power standard(V, Hz)?
5) When do you want the machine? (Times for delivery)
6) Other requirements about the machine you want.
sale-service
Pre-sale:
1. Suggest to client suitable Bare wire diameter, final product capacity.
2. Introduce machine's structure and features in detail, explain the price component;
3. answer client concerned questions.
After-sale:
1. Start production as soon as receiving down payment.
2. Send photos of machine in manufacturing and finished photos to client, for your better learn about the machine's condition.
3. Delivery machine in time, taking photos during loading, so you can "remote monitoring" your goods.
4. Documents and certificate available in time.
5. Manual documents available. Engineer can be sent to client site for installation instruction.
1. Suggest to client suitable Bare wire diameter, final product capacity.
2. Introduce machine's structure and features in detail, explain the price component;
3. answer client concerned questions.
After-sale:
1. Start production as soon as receiving down payment.
2. Send photos of machine in manufacturing and finished photos to client, for your better learn about the machine's condition.
3. Delivery machine in time, taking photos during loading, so you can "remote monitoring" your goods.
4. Documents and certificate available in time.
5. Manual documents available. Engineer can be sent to client site for installation instruction.
