Product Description
Guangzhou CNC GSK928TD-L CNC lathe System 2 Axis
Guangzhou CNC has lathe CNC system, drilling and milling machine CNC system、
CNC system of machining center、CNC systems in many fields such as grinding machine CNC system.
(Be careful：For detailed specifications, models and inquiries, contact customer service for negotiation)
Guangzhou CNC 928TD-L Combination suit
Specification
Motion control function |
Specification control axis: X axis, Z axis and Y axis; Simultaneous control axis (interpolation axis): 3 axes (x, Z, y) |
Interpolation function: x-axis and z-axis linear, arc and thread interpolation, and Z / X / Y-axis linear linkage |
Position command range: - 9999.999mm ~ 9999.999mm; Minimum instruction unit: 0.001mm |
Electronic gear: Command multiplication coefficient 1 ~ 999999, command frequency division coefficient 1-999999 |
Fast moving speed: up to 30000mm / min; Fast magnification: F25%, 50%, 75% and 100% four-level real-time adjustment |
Cutting feed rate: up to 15000 mm / min; Feed rate: 0 ~ 150% sixteen level real-time adjustment |
Manual feed speed: 0mm / mn-1260 mm / min, 16 levels of real-time adjustment, or the feed speed can be customized immediately |
Hand pulse feed: three gears of 0.001mm, 0.01mm and 0.1mm |
Acceleration and deceleration: exponential acceleration and deceleration or linear acceleration and deceleration can be selected for cutting feed |
Display interface |
Display: 7-inch, 800 * 480 dot matrix, true color liquid crystal display (LCD), LED backlight |
Display mode of display interface: Chinese or English display interface is set by parameters; It can display the machining path |
Clock display function |
Programming |
Program capacity: 255 programs at most, with a total program capacity of 33MB |
Editing method: full screen editing, support mixed programming of relative absolute coordinates, support program call, and support multiple nesting of subroutines |
Program drawing check |
signal communication |
With USB and RS232 interfaces; CNC and USB, CNC and PC, CNC and transmission program, parameters, cutter compensation |
Support system software RS232 interface, USB Download and upgrade |
Adaptive drive |
Guangzhou CNC GSK DA98 series digital AC servo motor with pulse + direction signal input and SJT series absolute servo motor |
Spindle speed control |
Speed switching value control mode: s command gear 4 direct control output range is S01 ~ S04; Or 16 gear B ℃ D code output range is S00 ~ S15 |
Speed analog voltage control mode: s command code gives spindle speed per minute or cutting linear speed (constant linear speed control) |
Output 0 ∨ ~ 10 ∨ voltage to spindle frequency converter, spindle stepless speed change, support 4 spindle mechanical gears M41 ~M44 |
Support the speed / position control mode switching of gs3000 servo spindle, and realize the linkage between spindle and Z or X Axis |
I / O function |
I / O function diagnostic display |
I / O function 1o port: 32 point input / 32 point output |
Word programming |
Assignment statement: complete assignment, multiple arithmetic and logical operations |
Statement programming condition statement: complete condition judgment and jump |
Product features
I/O (input detection / output control)
●Controllable spindle, tool holder, chuck, tailstock, cooling, pressure detection, external start pause, feed holding knob and other devices (fixed pin)
●Controllable tricolor lamp, hand pulse, protective door, lubrication, headstock lubrication, shift unit, feeding unit and other devices (pins arranged by the machine tool factory)
Simple operation
●Flexible and diverse help functions
●Full screen editing, error checking of part program in advance, simulation and drawing of motion track;
●Introduction to editing mode system instructions
●All kinds of operation are simple, safe and easy to use
●Special display interface can be designed by ourselves
Special display interface can be designed by ourselves
●The display surface can be designed to prompt the operator how to operate
High speed smooth interpolation of short line
●Adopt forward-looking control to realize high-speed connection and transition;
●Smooth machining of ellipse and parabola with short straight line without stun mark
Pitch error inflection point input Fine density compensation
●Just input several groups of inflection point data on the curve to automatically carry out fine and smooth compensation!
Packing & Delivery
FAQ
Q: Do you support customized manufacturing?
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface
and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface
and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below