LF77-AKZ250-USB3-NPN 3 Axis Mach3 Motion Controller Mach3 USB Controller For CNC Engraving Machines
Version Introduction:
THIS is a 3-axis Mach3 USB interface board (NPN) worked with Mach3.
Package Included:
- 1 x Set of USB Motion Controller
Note:
- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!
Features:
- It has a USB interface and no driver is required.
- Support 3-axis linkage, 500KHz output at the same time, connected to servo/stepping. Any one axis can be configured as a pulse spindle.
- 2 real-time electronic handwheel (MPG) input ports, which can connect 2 electronic handwheels at the same time. When the MACH3 electronic handwheel is set in Multi-Step mode, it has the same real-time performance as the CNC machining center, and runs smoothly. There is no delay in the control board, and the performance of the mechanical system is fully utilized.
- With real-time jog, there is no delay in the control panel, the motor responds quickly and quickly, and the experience is zero delay.
- 16 general digital input points, corresponding to 16 LED indicators. Customize the configuration function in MACH3. Support Mach3 spindle speed measurement function.
- 8 general-purpose digital output points, configurable as: spindle start/stop/coolant/custom M code VBasic programming control
- 1 PWM output point for analog spindle speed control: pulse width speed control / 0-10V inverter speed control.
- 2 analog inputs, used to adjust the processing speed / jog speed / spindle speed.
- 1 status indicator, which can indicate the USB connection, and the status of the motor is clear at a glance.
- Using 3 dual-channel 10Mhz high-speed optocouplers, 26 general optocouplers, a total of 29 optocouplers, isolate all input/output. The high-cost design provides complete anti-interference performance and complete safety protection.
- Without PC intervention, the signal is processed independently by the motion control board to ensure that you have real real-time and reliability.
- Support all versions of Mach3. Supports all versions (32-bit/64-bit). For Windows XP to Windows 10, and all Windows versions are plug and play.
- The chip firmware supports upgrades, and users can continuously get the latest function support.
- Provide a complete installation manual with clear documentation, illustrations and detailed descriptions.
- 16 input/8 output/3 axis/spindle speed control signals are all optically coupled and electrically isolated. Highly safe and reliable design.
Environmentally-Friendly Copper Terminals:
Axis output x3 / general output x8 / PWM output x1 / general input x16 / power input
Copper USB Socket:
3-axis output signal (direction signal + pulse signal): 10MHz high-speed optocoupler isolation x6 channels
Optocoupler isolation PWM spindle speed control signal output x1 / Optocoupler isolation general output x8
8-channel output driver chip, using high-quality round pin sockets, convenient for users to replace the chip
Optocoupler isolated NPN input x16 / power input
2 groups of power supplies: BUCK switching power supply + LDO low dropout linear power supply
Tantalum capacitor + self-recovery fuse + anti-reverse diode + TVS anti-surge diode
USB cable (Accessory: USB cable *1.5M, 7mm magnetic ring *2)
External magnification knob
Wiring of Controller Board & Laptop:
Download:
- Installation manual (AKZ250V3) version 1.0.4 (ZIP/7M) /files/usb_eth_edg381/Mach3_USB_Motion_Board_NPN(AKZ250V3)Installation_Manual(english).zip
- Plugin V1.2.1.0 (eMotionMach3.ZIP/0.3M) /files/usb_eth_edg381/eMotionMach3.zip
- Download Latest Mach3: /software/mach3/
Schematic Diagram:
USB main control chip + external magnification knob x2
10MHz high-speed optocoupler isolation x6 channels + optocoupler isolation PWM spindle speed control signal output x1
Optocoupler isolation NPN input x16 + Optocoupler isolation general output x8
Power Supply:
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%
Please do not hesitate to contact me if you need any further information
Whatsapp/Tel/Wechat: 8619902906050
Web:
Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)