. English/Chinese and other languages optional
2. 7inch TFT-LCD, 1024(RGB)×600 resolution,16:9 NEW
4. VGA, HDMI signal input display,convenient to DVR / NVR settingNEW
5. DC12V 2A power output for camera NEW
15. 10xzoom,video image can be magnified to view the details, easy to use(only for analog video test)
16. Video record and playback (only for analog video test)
17. Snapshot and save the current image as JPG file in the SD card(only for analog video test)
20. PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement *NEW
21. Cable scan, Send the specific signal, easy to find the connected cable.
22. IP address scan, quickly search the IP address for the connected IP camera and other network devices
23. POE voltage measurement,test the PoE switch’s voltage to IP cameras, wireless AP device and other PD devices
24. Device Port flicker,easy to find the connected PoE switch port by sending special signals, the connected PoE port will flicker at special frequency.
25. Link monitor; check the setting IP address whether occupied.
27. PTZ address scan, search up the ID of PTZ camera.
28. Network cable and Telephone cable testing, display the sequence of connection and the NO of the LAN cable
29. Support RS232/RS485 /RS422,Rate 600 ~ 115200bps adjustable < /span>
30. Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D, SAMSUNG
31. PTZ protocol analysis, control protocol command displays to check RS485 transmission whether is normal, easy to find the fault device
32. PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position
33. Audio input test, test the audio signal from pickup devices
35. Lithium Ion Polymer Battery .The device employs advanced power control and protection circuit.
There are different HVT-3600 Serial Tester.
The difference is below ,please choose the correct type according to your need.
This listing is HVT-3600.
Model | SDI-3600 / HVT-3600 | ||||
HDMI digital Video Signal * | |||||
digital Signal in | 1 channel HDMI in,support 1080P,720P | ||||
Video Test | |||||
Signal mode | NTSC/PAL (Auto adapt) | ||||
Video Output Mode | 1.0 Vp-p | ||||
Display | 7inch TFT-LCD, 800(RGB)×600 resolution | ||||
LCD adjustment | Brightness, Contrast, Saturation adjustable | ||||
Video IN/OUT | 1 channel BNC Input & 1 channel Output | ||||
VGA input display | |||||
VGAinput display | Receive DVR,NVR VGA signal | ||||
Video Level test | |||||
Level test | Video signals measured in IRE or mV | ||||
DC12V 2A power output | |||||
DC12V power output | Output DC12V/2A power for camera | ||||
5V power output | |||||
Power output | Output 5V power for phone as power bank | ||||
Audio input test | |||||
Audio input test | test the pickup and other audio equipments on the front-end | ||||
PTZ controller | |||||
Communication | Support RS232 and RS485 | ||||
PTZ Protocol | Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. | ||||
Baud Rate | 600,1200,2400,4800,9600,19200,57600,115200bps | ||||
Video Signal Generation | |||||
Color bar generator | Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color ) | ||||
UTP Cable tester | |||||
UTP cable test | Test UTP cable connection status and display in the screen. Read the number of the test box. | ||||
RS485 /232data analysis | |||||
Data Monitor | Captures and analyzes the command data from controlling device | ||||
10x Zoom Image | |||||
Image 10x zoom | 10x zoom image display and video out | ||||
Photograph,Video record, Record playback | |||||
Photograph | snapshot and save the current image as JPG file | ||||
Video record | Video record and storage the file | ||||
Record playback | To view the storage file in the SD card | ||||
Port flicker | |||||
Port flicker | Find the connected POE port quickly. | ||||
IP scan,Link monitor,PING test | |||||
IP scan | Find out the connected IP camera or the other network equipment IP address quickly. | ||||
Link monitor | Check the IP address whether is occupied | ||||
PING testing | Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address | ||||
Cable scan * | |||||
Cable scan | Search the cable by the audio signal | ||||
PoE test | |||||
PoE test | Display the power supply voltage and cable connection states | ||||
POWER | |||||
Power Adapter | DC 5V(2A) | ||||
Battery | Built-in 7.4V Lithium polymer battery ,6500mAh | ||||
Rechargeable | After charging 6-8 hour, working time lasts 17 hours | ||||
Low Consumption | Energy saving technology, the battery icon real-time display | ||||
Parameter | |||||
Operation setting | English/Chinese and other languages OSD menu | ||||
Auto off | 5-60 (mins) | ||||
Keytone | On/Off | ||||
General | |||||
WorkingTemperature | -10℃ ~+50℃ | ||||
Working Humidity | 30%~ 90% | ||||
Dimension/Weight | 256mm x 173mm x 50mm / 1.2kg | ||||
Note: * sign means optional function,
Our listing is HVT-3600,It doesn't have the optional function,if you need such function,please contact us.
What's included in the package is below :