Delivery Time:1-30 work days
Certification:CE
WSH01 WSH02 WSH03 high pressure solenoid directional valves
General Data
| Mounting position | anywhere | |
| Operating temperature ℃ | -30~+50(nitrile rubber seal) | |
| -20~+50(rubber seal) | ||
| weight | Single solenoid valve kg | 1.45 |
| Double solenoid valve kg | 1.95 | |
Hydraulic Data
| Maximum operating voltage fluid port P,A,B Mpa | 31.5 |
| Hydraulic fluid port Mpa |
21(DC):16(AC) When working pressure exceeds the allowable pressure, valves with the sign bit A,B must use T as oil drain port |
| Maximum flow rate 1/min | 80(DC); 60(AC) | ||
| Flux areas (when in the median) | Type Q | mm2 | About 6% of the nominal cross-sectional area |
| Type W | mm2 | About 6% of the nominal cross-sectional area | |
|
Hydraulic oil 1,suitable for nitrile rubber and fluoro rubber seal 2,Fluoro seal only |
Mineral oil(HL,HLP) by DIN51 524 Rapid biological solution oil by VDMA24 568 HETG 1); HEPG 2);HEES 3) |
||
| The oil temperature range ℃ | -30~+80(nitrile rubber seal) | ||
| -20~+80(rubber seal) | |||
|
Viscosity range mm2/s |
2.8-500 | ||
| Oil cleanliness |
The highest oil pollution level by NASI1639 Class 9 recommend minimum filter filtration precision β10 higher than 75 |
||
Electrical Data
| Voltage category | DC | AC(50HZ) |
| Supply voltage V | 12,24,48,110,220 | 110 220 |
| Allowable voltage tolerance % | +10~ -15 | +10~ —15 |
| Power consumption W | 30 | - |
| Holding current A | - | 0.17(220V) |
| Starting current A | - | 0.72(220V) |
| Working system ED% | 100 | 100 |
| Reversing time ms | 125~145 | 10~20 |
| Resetting time ms | 100~250 | 15~40 |
| Switching time times/h | lower than 15000 | lower than 7200 |
| Protection class by DIN 40050 | IP65(AMP:IP66) | (Deutsch:IP69K) |
| Maximum coil temperature ℃ | 135℃(class B) | 180℃(Class H) |
3. Excellent electrical characteristics of water and dust.
4. Press the solenoid coil is usually the standard configuration plug DIN43650 ISO4400 EN175301--803 its higher enclosure class AMP or DEUTSCH plug, or configure the power junction box.
Packing
1:Inner packing: opp bag, then carton box for each product.
2:Outer packing: export standard carton, Foam outside protecting the goods against damage
About us
1: Various style for each products and completely series auto parts products for you to choose from.
2: Large stock for fast shipping.
3: High quality with competitive price
4: Sample order & small quantity order is ok
5:Customize according to your special demand.
6: Provide free products information.
7. Reliable quality assured and active after-sell service
