Specifications
Price 3mm clear float glass1,Excellent mechanical strength
2,safety performance
3,Not easily broken.
3mm Clear float glass
Beveled glass panel:
1) polished edges processing
2) tempered/ toughened
3) silkscreen
4) More size and shape
Beveled glass specification:
- Beveled glass width from 5mm to 48 mm (From 0.2 Inch to 2 Inch)
- Customized size and design available
- Shape: regular square, rectangle, circle shape, irregular shape
- Regular size: 400x600mm, 600x800mm, 700x900mm, 500x500mm, 1000x1500mm, etc.
- Size tolerance: +/- 1.00mm.
- Minimum grinding size: 100*100mm,
- Packing: large beveled glass sheet is packed by wooden crate. The small glass sheet is packed by soft plastic foam being interleaved between each piece of glass, outside packed by strong wooden crate, suitable for long time ocean transportation.
Quality standard: CE, ISO9001, IKEA test report
NO. | NOVAL Beveled mirror quality standard | Grade A | |||
1 | Spot fault such as bubble or smear | < 0.4 mm | Permissible | ||
0.4 - 0.5 mm | Within 20cm from sides of Big-sized Mirror Within 15cm from sides of Middle-sized Mirror Within 8cm from sides of Small-sized Mirror | Permissible up to B 2 M 1 S 0 | |||
> 0.50mm
| Not Permissible | ||||
2 | Scratch | Width ≤0.1mm Length ≤50mm | Same position above | Permissible up to B 4 M 2 S 1 | |
3 | Edge Loss | Not permissible | |||
4 | Rough Particle | Not permissible | |||
5 | Scalloping on Bore Edge (No effect on safety and installation) | ≤3 mm | |||
6 | Missing grinding | 5%Perimeter of Big-sized Mirror 2%Perimeter of Middle-sized Mirror Not permissible on Small-sized and Model Mirror | B 2 M 1 S 0 | ||
7 | Stain | Not permissible | |||
8 | Ripple and Color Bottom | Not permissible when straight eye-inspection | |||
9 | Grinding Trace | Not permissible | |||
10 | Transparent Spot | Not permissible | |||
1 1 | Shell | ≤0.3mm | |||
12 | Scratches in grooves | 2lines width ≤0.3mm / 0,5 m | |||
|
|
| |||
13 | Irregular cloudy on etching structure surface | Not permissible when straight eye-inspection | |||
14 | Hanger Position Tolerance Note: Glue should be neutral and vertical strip on hanger | ≤3 mm | |||
15 | Note: Forbid to clean lacquer with corrosive cleaner abluent. (e.g. acidic or alkaline liquid) | Not permissible |