Wheel brush with shaft, knotted wire
1.Technics Description:
Fill type
"soft"
B brass wire(cuzn), straight criped, dia.0.06mm to 0.50mm
AS abrasive nylon sic or ao,k80-k320 crimped
"medium"
S steel wire, natural hard, crimped, dia.0.60mm to 0.80mm
SS stainless steel wire, acid resistant, crimped or straight, dia.0.30mm to 1.00mm
"hard"
ST steel wire, tempered, straight, dia.0.30mm to 1.20mm
BS brass-coated steel wire, single wire, springy, crimped, dia.0.15mm
GS galvanized steel wire, natural hard, crimped, dia.0.06mm to 0.80mm
2. Safety requirements:
1. HANDLING:
While inspection, storage, fitting the brushes, be care to avoid the injury by the wires.
2. OPERATING:
In brushing operation, the potential of serious injury exists for both the operator and others in work fielde. So safety goggles, or full face shields and protective clothing must be used by all of the persons in work fields.
3. EQUIPMENT CONDITION:
Proper maintenance of machines and power tools is essential to keep them in safety operating condition.
4. RUNNING SPEED:
Observe all speed restrictions indicated on the brushes or the packings.
5. BRUSHING PRESSURE:
Excessive pressure may causes overbending of the filaments as to breakage.
| Description | material | Max RPM | Wire diameter (mm) | Package | Pcs/Crt | G.W. | Carton Size | ||
| Wheel brush with shaft, knotted wire 65MM/T6MM*(ST) | steel wire | 4500 | 0.5 | sliding card | 10/100 | 15.2 | 73.0 | 28.0 | 37.0 |
| Wheel brush with shaft, knotted wire 115MM/T6MM*(ST) | steel wire | 4500 | 0.5 | sliding card | 10/80 | 19.7 | 61.0 | 47.0 | 35.0 |
| Wheel brush with shaft, knotted wire 125MM/T6MM*(ST) | steel wire | 4500 | 0.5 | sliding card | 6/60 | 18.0 | 70.0 | 31.0 | 35.0 |
If you are interested in this product, Please inquire us for more information
