hydraulic screw press briquetting of biomass machine

Introduction about briquetting of biomass

The new briquetting of biomass we have designed ensure higher product quality. The machines have a higher capacity.The Briquette press can be used to extrude briquette bar in different shape as hexagon, cylinder or quadrangle under high pressure and high temperature.This charcoal press owns the advantages of high production capacity,high density, low power consumption, low wear and also the output is with high heat, no pollution, and longer burning.

model	capacity(kg/h)	power(kw)	bar diameter(mm)	weight(kg)	packing dimension(mm)
ZBJ-50	100-150	11	50	500	1750*680*1250
ZBJ-50C	350-420	22	50	600	1950*1050*1350
ZBJ-60	150-200	15	60	550	1750*680*1250
ZBJ-70	250-300	18.5	70	700	1920*750*1350
ZBJ-80	250-400	22	80	750	1920*750*1350

Working principle about briquetting of biomass

Briquette is a process that biomass is compressed under high pressure and high temperature. The self bonding of biomass to form a briquette involves the thermo plastic flow of the biomass. The lignin content that occurs naturally in biomass is liberated under high pressure and temperature. Lignin serves as the glue in the briquette process, thus binding, compressing the biomass to form into high density briquettes. During this process, no binder is used. So the surface of briquette is a type of clean and green fuel that is ideal for use in furnaces, boilers and open fires.

Raw material about briquetting of biomass

Any types of Agro-forestry waste Such as sawdust,stalk sawdust, paddy straw, sunflower stalk, maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo saw dust, bagasse, wood chips, rice husk, coffee husk,coir pith, jute sticks, groundnut shells, Bamboo , wood , straw dust, Mustard stalk and cotton stalks etc.
1. Crushing the raw materials diameter into size no bigger than 5mm.
2. Dry the crushed materials to 8-12%.

Final products about briquetting of biomass

This briquette is 40-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.
The available shape: square, hexagonal, pentagon, pentagon with edge, hexagon with edge.
The available diameter could be: 50mm,55mm.60mm,65mm.70mm.80mm and so on.
The available length could be :20cm,30cm, 40cm, 50cm.

Apply of final products

1.Use as biofuel directly for furnace or boiler, electric power plant , even for home cooking/heating and open fires.
2.Further processed it for BBQ charcoal.

 

Parts about briquetting of biomass

The screw press briquette machine has spare parts, such as propeller, heating rings, moulding tube, and wear-resistant cover. 

The propeller is the core equipment to make briquette;
The heating rings controls the optimal temperature to make briquette;
The moulding tube is to control the final product shape and diameters.

We could provide the whole production line:
wood crusher/chipper machine → air flow dryer machine → charcoal briquette machine → carbonization stove

We can provide you the whole line to make wood charcoal, including the crushing machine, sawdust drying machine, sawdust bbq charcoal briquette machine and carbonization furnace. But first: make sure your raw material's size, whether the crushing machine require or not; Second, make sure your moisture content of the sawdust, if over 12%, the dryer machine is ok to require; This two steps has made sure, we can make briquette and then carbonizing. This is the whole process to finish the process of manufacturing the charcoal briquette.

 

1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick

Advantage
1.Renewable
2.Eco-friendly energy especially for agricultural countries
3.Equipped with automatic temperature control system and automatic briquette cutting system
4.Wood biomass briquette after carbonization are perfect charcoal which is widely used
5.small size, light weight, simple installation, easy to operate;
6.high efficiency, saving energy obviously.
7.secure, reliable, very safe for the operator;
8.a unique cycle circulation system, ensure that the equipment 24 hours of continuous work.

 

The machines are packing in the plywood boxes, then put into the 20 feet or 40 feet container in delivery.

Gongyi Xiaoyi Mingyang Machinery Plant is one of the largest and earliest manufacturers of the biomass energy equipment ( biomass briquette machine line, charcoal making production line, wood pellet production line and the related machinery).
* one of the largest and earliest manufacturers of the charcoal making machine, biomass briquette machine and wood pellet production line in China with 30 years experience.
* Covered an area of 12000 square meters, currently has more than 120 employees, divided to 7 department.
* Designed and produced 6 production line, more than 150 kinds of machines, awarded 10 patents in China.
* Products are widely accepted in both domestic and world market ,more than 150 countries.
* The company enlarged for building one experimental Center of high-tech automtaic production equipment to meet the market requirement.
* Professional after-sales service team to be able to handle client issues in a timely manner.
* high level standard workshop, advanced producing equipment, Experienced technicians, fine workmanship with 30 year working experience.
* stock for based goods, accessories in stock to meet you need,stocked your samples and all the details of the goods of the next order.
* strict inspection personnel and process, and we are strictly ensure the quality of the international standard.
* We have the test center of the machine, Each machine will running before delivery.
* recommend clients for free, offer the layout drawing and the profit table and install video and free stuff training.

 

We have the professional and experienced team to assist you;  If there is any questions, please feel free to contact me, I am always here online waiting for your calling, also click the name card to get more information;