China Foam generator for CLC foam blocks equipment
Overview of the equipment :
New building material foam concrete block featurs:
*Low Cost *Light Weight
*Heat Preservation *Sound Insulation
*Fireproofing *Aseismatic
*High Construction Speed *Environmental Protection
GM2000 foam concrete mixer:
Features:
1. The foam blending fast, blowing foam uniformly.
2. Without suspended matter, without the declining, it’s good for steady pouring.
3. Little loss ratio of foam maintain the foam proportion in the foam concrete to make the products with stability density.
4. No dead angle design, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.
5. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.
6. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high, it saves energy.
Technolog data :
| Model | GM2000 |
| Production Capacity | 15-20 m3/h |
| Output Volume | 1500 L |
| Material Input Volume | 2000 L |
| Main Shaft Revolution | 32 r/min |
| Hopper Lifting speed | 22 m/min |
| Mixing Motor | 11 kW |
| Winding Motor | 5.5 kW |
| Water Pump Motor | 1.1 kW |
| Vibrating Motor | 0.55 kW |
| Foaming System | 5.5 kW |
| Max. Moving Speed | 15 km/h |
| Total Weight | 3200 kg |
| Overall Dimension | 2600x2250x3000 mm |
GH foam concrete Pump
Technical data sheet:
Model | GH76 |
Output | 20m3/h |
Max. theoretical conveying pressure | 1Mpa |
Hose ID(mm) | 76mm |
Re (r/mm) | 55m |
Max. Particle Dia ( mm ) | 10 |
Max. Suct.Left ( m ) | 5 |
Motor Power (kw) | 15 |
If want big output, we also have GP30 foam Concrete pump for option
If want improve working efficiency, also could choose wire cutting machine to cut blocks into small size.
Formula for the production of foam blocks in china :
Delivery of equipment for the production of foam blocks china :
Worksite of Manual Brick Making Machine :
The bricks made by our Manual Brick Making Machine
Certification of our company:
Question 1: What is CLC?
CLC is cellular lightweight concrete. It is produced by initially making slurry of Cement, Sand (optional), Fly-Ash & Water, which is further mixed with the foam agent.
Its many uses for making blocks/bricks, wall cast in-situ, roof insulation, void filling, trench reinstatement, bridge abutment work, and many others. For more application, please see application
Question 2: What are the raw material?
For making CLC bricks/blocks, the material mainly is cement, fly-ash/sand, foam agent, water etc.
Question 3: For cutting blocks, saw blade cutting machine or wire cutting machine is better?
If use blade cutting machine:
a. Longer cutting time after pouring concrete
b. Need 2 machines for cutting in 2 directions
c. High blade consumption, especially if the sand in CLC is course or density is high
But if use our GW 30B wire cutting machine, it will solves the above problems.