Choose GEC, Choose high quality
Zhengzhou supplier new design CLC block making machine with low cost
Model: GM2000&GH76
New building material foam concrete block features:
*Low Cost *Light Weight
*Heat Preservation *Sound Insulation
*Fireproofing *Aseismatic
*High Construction Speed *Environmental Protection
Formula for the production of foam blocks in china:
Working priciple:
Foam concrete machine put cement and water into a slurry mixing and then mix them in a certain proportion, press them into
transmission pipelines through hydraulic cylinder; According to a certain proportion foam mixed with water and then mixed with compressed air by the high-pressure pump; In the pipeline it form the high-density foam and meticulous, at last form the foam cement with the slurry in the pipeline.
GAODE foam concrete machine contains:
1. Foam Concrete Mixer
2. Foam Concrete Pump
3. Foam Concrete Block Mould
4. Foam Concrete Block Cutting Machine
5. Foaming Machine
6. Foaming Agent
7. Foam Concrete Hardener
Main parts and technical data:
GM2000 concrete mixing machine:
Features:
1. The foam blending fast, blowing foam uniformly.
2. Without suspended matter, without the declining, it’s good for steady pouring.
3. Little loss ratio of foam maintain the foam proportion in the foam concrete to make the products with stability density.
4. No dead angle design, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.
5. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.
6. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high, it saves energy.
Technical data:
Model | GM2000 |
Production Capacity | 15-20 m3/h |
Output Volume | 1500 L |
Material Input Volume | 2000 L |
Main Shaft Revolution | 32 r/min |
Hopper Lifting speed | 22 m/min |
Mixing Motor | 11 kW |
Winding Motor | 5.5 kW |
Water Pump Motor | 1.1 kW |
Vibrating Motor | 0.55 kW |
Foaming System | 5.5 kW |
Max. Moving Speed | 15 km/h |
Total Weight | 3200 kg |
Overall Dimension | 2600x2250x3000 mm |
GH76 hose pump:
Technical data:
Model | GH76 |
Output | 20m3/h |
Max. theoretical conveying pressure | 1Mpa |
Hose ID(mm) | 76mm |
Re (r/mm) | 55m |
Max. Particle Dia ( mm ) | 10 |
Max. Suct.Left ( m ) | 5 |
Motor Power (kw) | 15 |
If you want big output, we also have GP30 foam Concrete pump for option.
Manual mould:
The mould size:
600x200x200mm
600x200x150mm
600x200x100mm
600x200x75mm
500x400x100mm
500x250x200mm
500x250x100mm
Also could be customized according to your demands
If want to improve efficiency, could use wire cutting machine:
GW 30B wire cutting machine:
Wire Cutting Machine is a new product in the foam concrete plant, It is specially used to cut various foam concrete blocks. Easy operation, high efficiency.
Main performance:
1. The lifting motor adopt the standard automatically brake motor.
2. Lifting speed could be adjusted through the frequency converter.
3. The block size between 100-200-300-400-500-600-700-800-900-1000-1100-1200mm could be adjusted willfully.
4. All motors are equipped with speed reducers.
Technical data:
Name | GW 30B Wire Cutting Machine | ||
Electric Motor (Kw) |
| ||
Effective hoisting height | 700mm | ||
| 1240*1240*225mm | ||
Net cutting size (L*W*H) | 1200*1200*600mm | ||
Cutting cycle | 60-180seconds | ||
Overall dimension (L*W*H) | 2160*2060*2280mm | ||
Total weight | 1100kg |
Foaming agent:
The foaming agent is a high-tech product, it has the characteristics as high expansion ratio, balanced density, foaming stability, and a long continuance, etc. Thus it is an environmental protective mighty foaming agent, which is nuisance-free and pollution-free.
Certifications of our company:
The bricks made by our Manual Brick Making Machine:
Application:
Note: The Foam concrete’s other application
- External wall thermal insulation
- Thermal insulation roofing
- Thermal flooring
- Upstandingbeam foundation ditches filling
- Sound insulation and fire protection walls
- Playground and track construction
- Sound insulation layer, tunnel lining filling
- Cellar, basement and arch filling
- Sewers and Drains filling
- Horizontal floor heightening
- Water tank and fuel tank building
- Platform filling and mending
- Garden and rockeries
- Foam concrete block
- Foamed concrete precasting ,hollow wallboard casting
Question 1: What is CLC?
CLC is cellular lightweight concrete. It is produced by initially making slurry of Cement, Sand (optional), Fly-Ash & Water, which is further mixed with the foam agent.
Its many uses for making blocks/bricks, wall cast in-situ, roof insulation, void filling, trench reinstatement, bridge abutment work, and many others. For more application, please see application
Question 2: What are the raw material?
For making CLC bricks/blocks, the material mainly is cement, fly-ash/sand, foam agent, water etc.
Question 3: For cutting blocks, saw blade cutting machine or wire cutting machine is better?
If use blade cutting machine:
a. Longer cutting time after pouring concrete
b. Need 2 machines for cutting in 2 directions
c. High blade consumption, especially if the sand in CLC is course or density is high
But if use our GW30B wire cutting machine, it will solves the above problems.