Sell Pipe Elbow

Model No.:15, 22, 28
Product Origin:China
Brand Name:JP
Price Terms:
Payment Terms:
Certification:
Description:The JP2 screw fitting is specially designed for brass copper, and a connector is developed to connect with brass copper. It is made of high quality brass rod, after being cold cut and hot forging processed. As a high-pressure resistant and corrosion resistant fitting, it has good outer appearance and no sand explosions. This kind of fitting can be tightly connected with the brass pipe, preventing gas and fluid leakage and little affected during movement. With tightened screws, the pipe and fitting can be easily and closely connected, getting rid of the worry about gas or fluid leakage. No special tool but a spanner is needed to tighten the screw. JP2 fittings are also easy to be dismounted and are used for next time. JP2 screw fittings are the first and most popular ones being used to connect with brass pipes. Tees include equal tees, reducing tees, female tees and male tees. Equal tee: all three ends of the tee are connected with brass pipes of the same size. A JP2-T15x15x15 tee should be connected with three #15 brass pipes on all the three ends. Reducing tee: all the three ends of the tee are connected with brass pipes. However, at least one of the three ends should be unequal. A JP2-T22x15x15 tee should be connected with a #22 pipe and two #15 pipes respectively on the left, middle, and right ends. Male tee: both right and left ends of the tee are connected with brass pipes, and the middle end is connected with a female thread. A JP2-T15x1/2x15 tee should be connected with a #15 pipe, a 1/2" female thread, and a #15 pipe respectively on the left, middle, and right ends. Female tee: both right and left ends of the tee are connected with brass pipes, and the middle end is connected with a male thread. A JP2-T15x1/2Fx15 tee should be connected with a #15 pipe, a 1/2" male thread, and a #15 pipe respectively on the left, middle, and right ends.