LAUNCH TS971 Tire Pressure Sensor Monitoring TPMS Bluetooth Activation Tool

LAUNCH TS971 TPMS Bluetooth Wireless Tire Pressure Monitoring Sensor Tester 433Mhz/315Mhz

LAUNCH TS971 integrates diagnostic functions of a variety of car models, with TPMS trouble light reset, sensor ID, battery status, tire pressure and temperature read, TPMS sensor activation and matching as well. It better meets the needs of auto repair shop, tire assembly line, individual owner and tire repair shop to diagnose, activate and match the TPMS system and the tire pressure sensors.

Launch TS971 TPMS Activation Decoder Tool Features:

1. Activate the TPMS sensors of most vehicle brands globally with right protocols;
2. Read tire pressure, temperature sensor ID and battery level; Duplicate or generate the new
3. sensor ID after sensor replacement; Rewrite the sensor position into the ECU after sensor rotation;
4. Help guide and software update subscription; Search by make-mode-year;
5. Tested sensor history query; Read and clear TPMS fault code.

Specification:

Display screen : 4inch TFT screen, resolution 320*480
OBD supply voltage: 9-18V
USB supply voltage:5V
Battery: Lithium-ion battery, 3100mAh,3.7V
Activate sensor frequency: 125KHz
Receive sensor frequency: 315MHz/433MHz
Working temperature: -10 to 50℃
Storage temperature: -20 to 70℃
Storage humidity: 10%~93%
Dimension:195x86x32mm
Weight :<460g
Drop: It won't be damaged in case of falling from 1 meter high.
Boot time: <5s, time from pressing power button to the main menu
Button response: 1 second
Working hour:  A year and a half in power off state;5.5 hours in working condition.



LAUNCH TS971 Supported Cars:

for Acura , for Alfa Romeo , for Aston Martin , for Audi , for Bentler ,for BMW ,for Bugatti, for Buick, for Cadillac, for Chevrolet ,  For Chrysler , for Coda , for ,Dodge , for Ferrari , for Fiat , for Fisker, for Ford , for Freightliner , for Genesis , for GMC , for Honda Motorcycle, for Honda , for Hummer , for Hyundai , for Infiniti , for Isuzu , for Jaguar ,for Jeep, for Kia , for Lamborghini , for Land Rover , for Lexus , for Lincoln , for Lotus , for Maserati , for Maybach ,for Mazda, for Mclaren ,for Mercedes, for Mercury , for Mini , for Mitsubishi , for Nissan , for Plymouth , for Pontiac, for Ram , for Rolls Royce , for Saab , for Saturn ,for Scion ,for Smart , for Subaru, for Suzuki , for Tesla , for Toyota ,for Volkswagen , for Volvo , for VPG

Charge and Boot

This TPMS diagnostic tool is equipped  with 3100mAh lithium-ion polymer battery. There are 2 charging methods:

1. By the power adaptor

1) Locate the device USB port.
2) Use the power adaptor to connect the device with the power supply.

2. By the USB cable

1) Locate the device USB port.
2) Use the USB cable to connect the device with the computer.
Note: To get a best device performance, please keep the device fully charged. Charge the device at least 2 hours before first use.
3) After charging, press the power button to start the device.



Power supplied by DLC

This TPMS diagnostic tool can be powered by vehicle DLC (Data Link Connector) in addition to the rechargeable battery. Follow the steps to start the device:
1. Connect one end of the diagnostic main cable to the diagnostic interface of the device and tighten the screw.
2. Locate the vehicle DLC position. The DLC is usually a standard 16 pin connector. It is an interactive interface between the diagnostic tool and the onboard computer. In most vehicles, the DLC is installed on the driver side, 12inch under the instrument, please see below picture.

Attentions for Device Usage

1. This device is a precision electronic instrument. Be sure no impact during using.
2. Take the device carefully, to avoid collision.
3. Turn the ignition to OFF position when insert or remove the OBD connector.
4. If the vehicle is not going to be used for a week or more, to ensure that  the battery  holds  its  charge  well,  it is  recommended  to unplug the connector.
5. In the use of the product, it is not recommended to use communication functions, such as telephone and SMS, which may lead to interruption of program data communication. If this occurs, please operate the related functions again.
6. Insert one end of the diagnostic main cable to the vehicle DLC.
7. Press the power button to start the device and wait for the main menu.

Package includes:

1pc x USB cable
1pc x Charger
1pc x Memory card
1pc x OBDII cable
1pc x User Manual
1pc x Magnet
1pc x Suitcase
1pc x Card reader

(Note: The magnet is only used to activate the tire pressure sensors equipped by part old vehicle models. When using, please put the magnet near to the gas nozzle while receiving the signal sent from the sensor with the device.)