Specifications
Double crank to adjust mouldEquipped with muffler and oiling system
1 cavity blowing mould(for 5-7L)
Capacity:300 B/H(for 5L
JM-B-I Semi-Automatic Bottle Blow Molding Machine
Specification:
HY-B-I semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 50-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
* Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
* The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
* The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
* The machine can be operated in the step-by-step mode and the semi-auto mode.
* The machine is small with low investment, easy and safe to operate.
Main parameter:
Max. volume of moulded product) | 2000ml |
Max.product capacity | 200-300B/H for 5L |
Max.Heating power | 14kw |
Pressure of air supply | 2.5mpa |
Max.mould dimension | 20*35*38cm |
Max.shifting mould dimension | 17cm |
Center distance between two bottles | min9cm max20cm |
Max.stretched length | 35cm |
Weight
Voltage
| 650kg
Three phase : 380V/50HZ Single-phase: 220V/50HZ |
Size Mainmachinine | 160*60*161cm |
Oven | 187*63*145cm |
Machine Name | Item | main parts | Description
| quantity |
HY-B-I Semi-automatic mould blowing machine (2 cavity) | 1 | Stretch Blow Equipment | 1 | |
2 | Rotary infrared pre-heater | 1 | ||
Auxiliary Equipment | ||||
3 | High pressure air compressor | 1.0/30KG | 1 | |
4 | Blowing Mold | 300-2000ML
| 1 | |
5 | High pressure pipe |
| 1 | |
6 | precision air filter |
| 1 | |
7 | Spare parts and tools |
| 1 | |
