hand tube bender
1.Perfectly complete pre-bending,rolled-up,roll calibrate.
2.Working principle: two down rollers as main driving roller,or all three rollers as main driving roller,with upper roller fixed and two down rollers do up-and-town movement around one fixed center
3.Well hydraulic control,displacement liquid-crystal display with accuracy+_0.1mm
4.The two touch steel stick can permit the good finishing quality of asymmetric plate section bending
5.Advanced and compact structure with full function.
6.The machine head can turn over horizontally or vertically.
Technical parameters
MODEL | capacity | Max working pressure | Bending angle | |
Outside diameter(CM) | Wall thickness(MM) | |||
BLT-2W | 21.5-60 | 2.75-3.5 | 63MPa | ∏/2≤a<∏ |
BLT-3W | 21.5-88.5 | 2.75-4 | 63MPa | ∏/2≤a<∏ |
BLT-4W | 21.5-108 | 2.75-4.5 | 63MPa | ∏/2≤a<∏ |
