1.Drop in bathtub over view.
drop-in bath tubs,drop-in acrylic bath tub/simple tub,full recess bathtub
2.Drop in bathtub detail photos.
3.Drop in bathtub specific information.
| 1.Product Name: | drop-in bath tubs,drop-in acrylic bath tub/simple tub,full recess bathtub |
| 2.Including: | Bathtub, Drainer and faucet are optional. |
| 3.Brand: | SUNZOOM |
| 4.Model No.: | 2838 |
| 5.Color: | Pure white |
| 6.Size(mm): | 1700*750*390mm;67"x30"x15" / 1500*750*390mm;59"x30"x15" |
| 7.Material: | A. Bathtub: Pure acrylic (warranty 10 years without fading) |
| B. Feet: No feet | |
| C. Option faucet: brass chromed (warranty at least 5 years) | |
| 8.Loading Quantity: | A. 20FT:280 |
| B. 40FT: 560 | |
| C. 40HQ: 680 | |
| 9.Certification: | CE,cUPC, |
| 10.MOQ: | 10 Sets/model, full container/order. Or negotiable. |
| 11.Trade Term: | FOB Ningbo |
| 12.Trade Assurance: | Yes |
4.Similar models.
If you like it, please click it.
5.Features and Advantages.
A.Good Material and craft.
1).Raw material
We use 100% pure acrylic, warranty at least 10 years without fading.
Glass fiber is without alkaline, resin is with good permeability and well distributed.
The acrylic we used is the thickest in the industry.The result is a durable tub that is easy to take care of.
2).Stainless steel under tub frame, makes it stable and safe. Warranty at least 10 years.
drainer and water flow are both brass,warranty at least 5 years.
3).Surface treatment.
60% of our technicians come from Guangdong province, they have 6 year experience in this field.
They do very well in surface treatment, makes the bathtub with a nice and polish surface.
The paint and polishing is the same as car polishing.
4). Easy clean and repair the scratch surface
As the raw material is pure acrylic, it is easy to clean, even if there is any scratch in the surface, it is easy to be repaired.
5).Packing: we use EPE foam wraped,wooden creat also available,suitable for online shopping.
C. Strict Quality Control.
1). We inspect the raw material strictly, ensure all the material meet our standard or customer's standard.
2). After vacuum molding the raw material, we inspect and if there is any defect, it will be dropped.
3).When joint the outside tub with the inside tub, we control the time strictly, ensure the two tubs joint perfectly.
4). After finish the bathtub, we double inspect the surface, workers use a torch to check if there is any defect.
For the defective goods,we will sell it internal or just scrap it.
5).There is a quality control superior from one of our US buyer, staying at our factory, to check each order export to America market. And your order process situation will be posted weekly.
D.OEM service is available.
How to Develop Your Own Products
1. Customers offer general drawing of the product.
2. Our designer will make a professional drawing according to your product layout, and quote to you.
3. After your confirmation of the drawings and price, we will make the mould. ( Maybe need mould fee )
4. Then we will send samples to you, you can tell us some points you want to adjust.
5. After your confirmation of the samples, we begin to produce the bulk.
We use EPE foam wraped,wooden creat also available,suitable for online shopping.
1.For the bathtub with unregular shape, we pack it one by one seperately.
2.For the bathtub with regular shape, we overstow pack it,to save space.
Our bathtub main market is North America, so we have got cUPC certification for all our bathtubs. We can also offer cUPC certified drainer.
How to install a drop in bathtub?
The installation of a drop-in bathtub is more than just attaching the plumbing for the tub, since it must be level and secure to support the weight and drain properly.
1)The Frame
The frame of a drop-in tub will support the majority of the weight around the edge of the tub, but the frame also doubles as a cover for the tub, so that only the interior and desired exteriors are shown. All the pipes are hidden within the frame. The frame must be level, attached to the wall studs where possible and, if not, use the same rules as house framing, with vertical studs placed at 16 inches from each other, center to center of the studs. There are two types of tubs: those with three walls surrounding them (alcove installation) and island installations (four walls). Dimensions are based upon the size of the tub and your desires for size of the tub island or frame.
2)Mortar Base
The framing is not enough to support the weight of a tub when a human body plus water are in it. A mortar base must be used to provide sufficient support. Drywall mud or cement mortar can be used. Usually, no more than four or six shovelfuls are required directly under the tub. Use plastic sheeting on top of the subfloor and underneath the mortar, as well as on top of the mortar, under the tub. Doing this keeps the tub from bonding with the mortar, allowing you to more easily remove the tub at a later date. Set the tub in the fresh mortar, then fill the tub all the way to the brim to simulate the weight of a body plus water and mold the mortar to the tub form. Allow this to set for 72 hours before draining the tub.
3)Plumbing
All of your rough plumbing is done before the tub is put in place so that the only plumbing you actually have to do is connecting the drain pipes, faucets and shower heads. Do all the plumbing while the tub is filled with water and drying. This way, you can drain the water when the mortar has dried. Attach the drain of the tub to the drain for the floor and the hot and cold water lines to the tub faucets. Depending on the type of plumbing you have, you may be working with plastic, metal or flexible piping. Flexible is the easiest to work with, as both metal and PVC plastic need to be cut and adhered together, which requires more work and time.
4)Wall Flanges
After you have plumbed the tub and are waiting for the concrete to harden, you can set wood screws through the flange that runs around the edge of the tub and up the walls. Screw these to the wall studs. These screws are then buried behind either drywall or cement board, depending on the finish material, which in turn goes on top of the wall all the way down to the top edge of the tub, with just a small joint for caulking and movement. This effectively locks the tub in place behind the wall installation. Any covering material is placed on the deck along with the wall tile, thus covering the framing entirely.
Hangzhou Sunzoom Household Co., Ltd. is founded in 2006 by Mr. Gavin Hsu. He had a dream that one day each family has a comfortable and happy life with our shower products. 5 years ago we are just a small workshop with less than 10 staff, and now we have two different factories, one is engaged in producing and researching shower products,like shower enclosure, shower door, shower cabin, shower tray and so on.The other one is focus on new products including kinds of bathtub.
Our Market: We position on common customer market, each consumer is our potential customer.
Our Quality: Three key processes assure the quality, material check before production, product test in production, installing test after production.
Our Price: We continuously strive to find ways of reducing our production costs and passing the savings over to our customer. You can get the same product with at least 5% lower price.
Our Brand:The goal of any strong brand is achieve a level of awareness that instills the idea of quality and value into all of your potential customers.
1. Why Sunzoom?
A. 2 Years warranty time guarantee.
B. Help customers do trouble shooting project.
C. Provide bathroom improvement and marketing solution.
D. Supply final market support.
E. Strict quality control system, Three times inspection during one production flow.
F. Resonable price with high quality.
G. CUPC,CE, FSC,ISO,SGS certificates are available.
H. 24 hours to give you prompt and further information.
I. Send invitation and arrange everything for you when you come to China.
2. How to make an order?
A. Send one inquiry or email.
B. Check email and choose models in our catalogue.
C. Negotiate detail order.
D. Confirm proforma invoice and arrange deposit.
E. 25 days later get your bathtub.
Q: What are the conditions of becoming a distributor of SUNZOOM in my region?
A: As long as you own the marketing resources in your region that can help us to sell or you have capacity to do local after sales services.
Q: What are the benefits of being a SUNZOOM distributor?
A: - Special discount .
- Marketing protection.
- Priority of launching new design.
- Point to point technical supports and after sales services.
Q: Can you support accessory for free?
A: Yes, usually we load around 3% frequently used accessories.
Q: If we want to do some customized products, can you produce it?
A: Sure, We can produce products according to customer’s requirements and do customized design.
Q: Can I buy only one set for home use with drop delivery?
A: Generally the MOQ is one full container.
But if you have container in China, we can help load one sample to your container.
Q: How long is the warranty time?
A: 2 years, we can supply free accessories.
1.Our business partner is mainly in Europe, Middle East Area, North America, and Australia.
Welcome to join us!
2.Photos with our customers.
If you have any inquiries, please feel free to contact me.
If you don't need it at present, please save my contact information.
We'd like to be your back up supplier!