Delivery Time:7-15days
Certification:ISO
Brocade 40 GbE Direct - Attached QSFP + Copper Cable Breakout , 1 m / 3 m / 5 m
Specifications
4*10 GbE direct-attached QSFP+ to four SFP+ copper breakout cable, 1 m, 3 m, or 5 m.
Specifications:
QSFP (40G) to 4x SFP+ (10G) Splitter Cable - 1m (3.3 ft)
Connector A: (1) QSFP 40.0 Gbps Rated Connector (SFF-8436 Compliant)
Connector B: (4) SFP+ 10.0 Gbps Rated Connectors (SFF-8431 Compliant)
Economically Links up a QSFP port with an Upstream 10GbE-SFP+ Switch
AWG30
Protocol agnostic support of 40GbE, QDR InfiniBand, SAS & Fibre Channel
Up to 10.3125 Gbps transfer rate per SFP+ channel (40 Gbps aggregate)
Robust Zinc die-cast SFP+ & QSFP connectors with pull-to-release latching
Bridge the gap between your 10G and 40G capable switches/host adapters
Low cross-talk and pair-to-pair skew maintains signal integrity
Fully compliant to the latest SFP+ & QSFP MSA (Multi-Source-Agreement)
Supports all current 10-Gigabit Ethernet and 40-Gigabit Ethernet standards
Designated form factor and electrical compliance for QDR InfiniBand
The perfect direct attached storage splitter cable for Fibre Channel & SAS
Enjoy a reduced power budget and lower port cost compared to optical
Fully RoHS compliant for environmental protection
Applications:
InfiniBand SDR, DDR
Ethernet 1G, 10G
FibreChannel
Rack-to-Rack, Shelf-to-Shelf Interconnect
Networking
Storage
Hubs, switches, routers, servers
Description:
QSFP to 4x SFP+ Splitter Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter cable between an available QSFP port on their 40-Gigabit/s rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter cable features a single QSFP connector (SFF-8436) rated for 40-Gb/s on one end and (4) SFP+ connectors (SFF-8431), each rated for 10-Gb/s, on the other. 10GSFP is the manufacturer of QSFP to 4 SFP+ Splitter Cables that designs and sources every subassembly in-house guaranteeing complete control over product performance, quality and consistency. Examples include our widely respected board-as-connector platform which is direct-welded to the wire and encased in a robust Zinc-Nickel backshell for superior crosstalk and EMI performance. Cable available in 0.5M (1.7ft), 1m (3.3ft), 2m (6.6ft), 3m (9.8ft) & 5m (16.4ft) lengths to accommodate your installation requirements.
Type |
Brocade Part No. |
Inglong’s Part No. |
Application |
Wavelength |
Media Type |
Distance |
OC12-POS-SFP |
OC12-SFP-MM |
OC12-SFP-MM |
OC-12(STM-4) |
1310 |
MMF |
500m |
OC12-SFP-IR1 |
OC12-SFP-IR1 |
OC-12(STM-4)SR-1/IR-1 |
1310 |
SMF |
15km |
|
OC12-SFP-LR1 |
OC12-SFP-LR1 |
OC-12(STM-4)LR-1 |
1310 |
SMF |
40km |
|
OC12-SFP-LR2 |
OC12-SFP-LR2 |
OC-12(STM-4)LR-2 |
1550 |
SMF |
80km |
|
OC48-POS-SFP |