MODEL:KL-350/1040
1,The characteristics of the product
KL-350/1040 type automatic paper bag making machine is the ideal equipment to take the flat papers with original colors or printed well as raw materials to make into paper bags with square bottoms.Its technique process is about:the flat papers after printing are delivered into the driving parts for positioning through automatic paper feeder and press line with rolling press device and then make one-side glue,folding and positioning and sticking and conveying device will convey them into the bottom position and conduct press horizontal line,open bottom,make glue and press togther and finally output finished bag products.
300GRAM
KORO is a manufacturer to make full automatic paper bag making machine,
which is the world's first company to make paper bags of 300gsm.
The machine could make bags from 80gsm to 300gsm
2,Shorten the cycle time
We set new standards to cut down the cycle time .Rapid cycle time improves capacity and lower production cost.KORO machine is one of the fastest ones among its like products. 180MINS
Plat-making Time Only Needs 3 Hours,
And The Perfect Non-stop Operation Is Well Ahead of The similar Machine,To Win More Time And Create More Value.
3,Minimum wear and cost
Our engineering expertise and the long service life of our equipment guarantee higher capacity and lower cost while at the same time increase the output of quality products and reduce the unit cost.
5‰
The waste is strictly controlled within
5‰ to save costs and reduce losses
4,High Quality
1)Reduce Power
3.7KW
For the power consumption,the main motor of KORO paper bag making machine is only 3.7kw,which is much lower than similar machines 10-20kw.Our machine is with the characteristics of reducing power consumption,paper sving costs,creating profits and more environmental protection.
2)Fastening
12.9Grades
High-end devices for the machine,even for each bolt,which using 12.9grades high strength bolts of more stess and more impact resistance.
3) Cooperation
NHK,SCHNEIDER,OMRON,MISIMI ETC.
From bearings to electrical apparatus,KORO company all use the international well -know high-quality brands,such as NHK,SCHNEIDER ETC.The machine performatce is more stable,mor efficient.
5,The applicable paper materials
Brown paper,copperplate paper,white-plate paper,white paperboard and grey paperboard etc(including laminting paper)
Brown paper Copperplate White-plate paper White paperboard Grey paperboard
6,Woring procedure7,Paper bag sketch map
8,Parts of machine
9,Main Technical Parameters
Width scope of bag faca | 180-350mm(7.09-13.78 inch) |
Organ height | 70-150mm(2.76-5.90 inch) |
Canister length of the paper bag | 290-600mm(11.42-23.62 inch) |
Paper width | 530-1040mm(20.87-40.94 inch) |
Paper length | 290-600mm(11.42-23.62 inch) |
Paper weight range with unit |
|
Product speed |
40-70pieces/min |
Glue type |
Watery glue(sticking the side can increase heat melting glue system |
Total power |
10KW Voltage :380V Frequency:50HZ with 4wires 3phases |
Total weight | 10T |
Overall dimension(L*W*H) | 14000*1800*1700MM |
Remark:the mechanical speeds are different due to the different factors like paper quality,gram weightscope,printing result,whether stick with PP film or not,quality of sticking agnet,paper size,climate and workshop environment.
10,Configuration List
Configuration | Brand Model | Origin | Remark |
Bearing | NSK | Japan | |
Linear bearing | NSK | Japan | |
Vacuum Pump | ORION |
Japan | |
Pneumatic element | SNSNS | Shanghai | |
Belt | Siegling | German | |
Needle bearing | IKO | Japan | |
Switch | Schneider | France | |
Contactor | Schneider | France | |
POM Gear | Mimusi | Japan | |
Main motor | ABB | Switzerland | |
Push button | Schneider | France | |
Limit switch | Omron | Japan | |
P L C | Omron | Japan | |
Photoswitc | Omron | Japan | |
Lower switch | Schneider | France | |
Touch screen | Weinview | Taiwan | 10.4Inch |
Frequency conversion | Omron | Japan |